AMGPS Echo-SI

Manufacturer:

AMGPS Echo-SI is a portable GPS tracker that can be used for a fleet management or personal needs. It can locate and control a status of a vehicle and send reports in real time.

AMGPS Echo-SI description

AMGPS Echo-SI is a portable GPS tracker that can be used for a fleet management or personal needs. It can locate and control a status of a vehicle and send reports in real time.

Basic Specifications:

Voltage: 12VDC/24VDC
Standby : Current <3mA
Work current : <30mA
GPS positioning accuracy : 15m
GSM positioning accuracy : 100m
GPS Frequency : 1575MHz
GSM Frequency : 850/900/1800/1900MHz
Hot/warm/cold start time : <3s,<15s,<60s
Dimensions (mm) L*W*H : 79.5X38.5X10.5
Weight : 45g

Product Features:

  1. Supports quad bands, i.e. 850/900/1800/1900MHz, universal in the world.
  2. Wide Input Voltage:6-36V DC.
  3. Supports single positioning and feedbacks position via GPRS at setting times.
  4. Supports vehicle positioning and tracking.
  5. Supports ACC status checking and vehicle status notifying.
  6. Use relay to remote control the vehicle..
  7. Use SOS button for SOS call.
  8. Use external MIC to monitor remotely

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47734
Integrated on27/08/2015
Revised on27/08/2015
General information
PurposeVehicle
Housing
Weight45 g (1.59 oz.)
Size79.5x38.5x10.5 mm (3.13x1.52x0.41 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)2
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Voice communicationFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Car crashFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over SMS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47734
Integrated on27/08/2015
Revised on27/08/2015

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

IP,123456,217.23.132.215,47734
APN,123456,{apn},{apn_user},{apn_pass}
Mode,123456,1

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “AMGPS Echo-SI”

2018, TelematicsTalks powered by Navixy | About