AMGPS Freko

Manufacturer:

AMGPS Freko is a budget vehicle GPS tracker for personal and business needs. It has internal GPS and GSM antennas, one ACC input and one output for remote engine blocking. 

AMGPS Freko description

AMGPS Freko is a budget vehicle GPS tracker for personal and business needs. It has internal GPS and GSM antennas, one ACC input and one output for remote engine blocking.

Location and tracking

  • GPS
  • Continuous tracking mode

Mobile networks

  •  850/900/1800/1900MHz
  • 2G

Power supply

  • 370 mAh Li-Ion build-in battery
  • External power supply (9 – 75 V)

Inputs and outputs

  • ACC input
  • One output for remote engine blocking

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47735
Integrated on06/09/2018
General information
PurposeVehicle
InstallationProfessional
Housing
Weight85 g (3 oz.)
Size95x45x10 mm (3.74x1.77x0.39 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity370 mAh
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature can be supported upon request
Feature can be supported upon request
GNSS signal levelFeature can be supported upon request
Feature can be supported upon request
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)
Feature already supported in
Remote outputs controlYes (over GPRS)
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47735
Integrated on06/09/2018

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode through the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

begin123456
apn123456 {apn}
apnuser123456 {apn_user}
apnpasswd123456 {apn_pass}
gprs123456
timezone123456 0
adminip123456 {server_ip} 47735

The <APN> parameters depend on your GSM carrier and should be sent without brackets.

Reviews

There are no reviews yet.

Be the first to review “AMGPS Freko”

2018, TelematicsTalks powered by Navixy | About