Astra AT200

Manufacturer:

Astra AT200 is based on the very latest technology, but with a careful eye on cost! Like our other devices, the AT200 has an ARM Cortex M3 Processor, ublox EVA-M8M GNSS, 3-axis accelerometer, internal back-up battery and advanced power/battery management. With compact dimensions, integrated antennas, LED status indicators and externally accessible SIM, the AT200 is simple to install and inconspicuous in appearance. It’s Bluetooth capability allows driver ID and vehicle immobilisation based on the authorised drivers mobile phone.

Astra AT200 description

Astra AT200 is based on the very latest technology, but with a careful eye on cost! Like our other devices, the AT200 has an ARM Cortex M3 Processor, ublox EVA-M8M GNSS, 3-axis accelerometer, internal back-up battery and advanced power/battery management. With compact dimensions, integrated antennas, LED status indicators and externally accessible SIM, the AT200 is simple to install and inconspicuous in appearance. It’s Bluetooth capability allows driver ID and vehicle immobilisation based on the authorised drivers mobile phone.

Location and tracking

  • Continuous and interval tracking modes support
  • LBS Support

Mobile networks

  • 2G Network

Inputs and outputs

  • 2 Discrete inputs
  • 1 Output

Other features

  • Remote management
  • LED indication

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47697
General information
PurposeVehicle
InstallationProfessional
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)2
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Driver ID readingFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous, Interval
Feature can be supported upon request
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature can be supported upon request
Feature can be supported upon request
Events monitoring
Battery lowFeature already supported
Feature already supported in
Device switched on/offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature can be supported upon request
Feature can be supported upon request
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47697

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

$APAD,{apn}
$APUN,{apn_user}
$APPW,{apn_pass}
$IPAD,{server_ip}
$PORT,47697
$MODE,4

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Astra AT200”

2018, TelematicsTalks powered by Navixy | About