Atlanta L-100

Manufacturer:

Atlanta L-100 is a GPS tracking device with average functionality, which can be used for vehicle tracking.

Atlanta L-100 description

Atlanta L-100 is a GPS tracking device with average functionality, which can be used for vehicle tracking.

Packaging content:

  • L-100 tracking device
  • Wiring harness
  • Fuse
  • Relay with socket (optional)
  • SOS button (optional)
  • User manual

L-100 Features:

  • Large memory for data retention
  • High accuracy internal accelerometer
  • GPS/GSM antenna internal
  • GPS position accuracy <3meter
  • Support over the air firmware upgrade
  • Support GPRS tracking
  • LED indication for GSM & GPS status
  • Analog inputs -1
  • Supports TCP IP/UDP/FTP/HTTP/data
  • Digital inputs/outputs- 4/1
  • Internal battery backup
  • Small size

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46990
General information
PurposeVehicle
InstallationProfessional
Housing
Weight80 g (2.82 oz.)
Size99x54x16 mm (3.9x2.13x0.63 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)5
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Outputs
Feature already supported in
Hardware features
Battery capacity450 mAh
Feature already supported in
Built-in batteryFeature already supported
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Self monitoring
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46990

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

#config::{apn}::{apn_user}::{apn_pass};<6906>
#serverchange::217.23.132.215::46990;<6906>

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Atlanta L-100”

2018, TelematicsTalks powered by Navixy | About