Manufacturer:

ATrack AT5i is a versatile multifunctional tracking device, providing you with the most reliable up to date tracing information of your vehicle’s current position or movement status via GPRS network. Furthermore, vehicle tracking can also be combined with a variety of customized events based on your needs. In addition, the AT5i GPS/GLONASS vehicle tracker supports a wide range of hardware applications as it features multiple Digital and Analog I/O ports.

ATrack AT5i description

ATrack AT5i is a versatile multifunctional tracking device, providing you with the most reliable up to date tracing information of your vehicle’s current position or movement status via GPRS network. Furthermore, vehicle tracking can also be combined with a variety of customized events based on your needs. In addition, the AT5i GPS/GLONASS vehicle tracker supports a wide range of hardware applications as it features multiple Digital and Analog I/O ports.

Package contents

ATrack AT5i package contains the following device/accessories:

  • Device
  • GSM Antenna
  • GPS Antenna
  • Power/IO Cable
  • Serial Cable

 

Product features:

  • AES-128 data encryption
  • Data communication via SMS/USSD/GPRS(TCP/UDP)
  • GPS antenna tamper detection & report
  • Built-in 3-axis G-sensor
  • Vehicle Speed Sensor (VSS) supported
  • Firmware over the air (FOTA) upgrade via the FTP protocol.
  • Configurable Real Time Tracking & Logging
  • 64 user defined geo-fences in circular, rectangular and polygonal shapes
  • Roaming preference settings
  • Harsh driving behavior events
  • Configurable power management
  • Max. 140,000 log and 21,000 queue messages
  • 2 way voice communication & wire-tap
  • 1-Wire® iButton® for driver identification
  • 1-Wire® temperature sensor supported
  • Support Garmin® FMI 2.0 and above
  • Intelligent event control engine

 

Location and tracking

ATrack AT5i is embedded with GPS. It is also available as GPS/GLONASS version.

As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Mobile networks

ATrack AT5i has a Quad-band GSM 2G module that allows to operate it all over the world.

Power supply

External power supply might be 8-40V, which makes possible to use ATrack AT5i with all car models.

Local and remote management

ATrack AT5i can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED Indication

ATrack AT5i model has three LEDs:

  • Power LED – indicates power status
  • GPS LED – indicates GPS signal
  • GSM LED – indicates GSMS signal

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47712
General information
PurposeVehicle
InstallationProfessional
Housing
Weight100 g (3.53 oz.)
Size100x65x26 mm (3.94x2.56x1.02 in)
GNSS Location
External antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM Quad Band
External antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
RS232 interface
Number of RS232 interfaces1
Number of outputs3
Number of inputs (all types)5
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity700 mAh
Feature already supported in
Built-in battery
Feature already supported in
Hardware extras
Driver ID readingFeature can be supported upon request
Feature can be supported upon request
External temperature sensor reading
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
Location by Cell IDFeature already supported
Feature already supported in
Smart power consumptionFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Mobile signal jammingFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
EAC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47712

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Reviews

There are no reviews yet.

Be the first to review “ATrack AT5i”

2018, TelematicsTalks powered by Navixy | About