Bitrek BI 810 TREK

Manufacturer:

Bitrek BI 810 TREK is a universal vehicle location device that work with GPS, GLONASS, Galileo and Beidou networks. It can be used for a fleet management or personal purpose.

SKU: 679143ec7345.

Bitrek BI 810 TREK description

Bitrek BI 810 TREK is a universal vehicle location device that work with GPS, GLONASS, Galileo and Beidou networks. It can be used for a fleet management or personal purpose.

Package content

The package contents:

  • GPS Tracker
  • GSM antenna (2m)
  • GPS antenna (2m)

Features

This tracker has a solid waterproof housing and a wide range of options for integrating with external sensors and devices. It has internal/external GNSS antenna and internal GSM antenna.

It can read fuel level over RS-485 interface.

Location and tracking

Bitrek BI 810 is a universal vehicle location device that work with GPS, GLONASS, Galileo and Beidou networks.

The device supports only continuous tracking mode.

Mobile networks

With Quad-band GSM 2G module Bitrek 810 can be operated all over the world.

Local and remote management

Bitrek BI 810 tracker can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

Also it is fully configurable via serial cable using proprietary software (Bitrek Configurator)

Power supply

External power supply might be 12-24V, which makes it possible to install Bitrek BI 810 both on cars and vans.

It has a built-in battery that can support the 12 hours of autonomous work.

LED indication

Bitrek BI 810 has 3 LEDs

  • Red for Power 
  • Green for GNSS
  • Yellow for GSM

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47776
Integrated on25/06/2015
Revised on25/06/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight175 g (6.17 oz.)
Size95x95x29 mm (3.74x3.74x1.14 in)
Waterproof classIP6X
GNSS Location
Internal antenna (GNSS)
External antenna (GNSS)
GPS
GLONASS
Galileo
Beidou
Connectivity
Cellular network typeGSM 900/1800
Internal antenna (Connection)
External antenna (Connection)
Cellular network generation2G
Interfaces
RS485 interface
Number of outputs1
Number of inputs (all types)5
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Outputs
Feature already supported in
Hardware features
Battery capacity1000 mAh
Feature already supported in
Built-in battery
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Input changeFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
GNSS satellites fixedFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47776
Integrated on25/06/2015
Revised on25/06/2015

Bitrek 810 is tightly integrated with this software platform.

Activation process

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

When you activate a device, the following SMS command is sent from server to device:

SMS command from

Server to Device

SMS reply from

Device to Server

Command

explanation

setparam 0245 tracker.navixy.com;
setparam 0246 47776;
setparam 0242 <APN>;
setparam 0243 <user>;
setparam 0244 <passwd>;
setparam 0903 300;
setparam 0011 300;
setparam 0012 100;
setparam 0013 10;
setparam 0470 1;
setparam 0474 3;
setparam 0420 1;
setparam 0410 1;
setparam 0450 1;
setparam 0440 1;

 Setup ok Activating device setup

Some parameters will depend on your cellular network operator:

  • APN: The Access Point Name for the GSM SIM card.
  • User: Username for the GPRS
  • Password: Password for the GPRS

As soon as this command is executed the GPS tracker will connect to the server, and the rest of configuration process will be done via GPRS channel.

Manual configuration

If you experience issues with the SMS delivery from the platform to device in your country, you can setup device manually by sending the above list of commands from your mobile phone.

You can send these commands as one SMS, so it will be easier and cheaper for you.

Additional info

There are always 6 inputs, but not all of them are used, so its important to know that ACC/Ignition input is always number 6.

Other

Bitrek hardware is also supported in other platforms, in particular, in Wialon and Fort Telecom.

Reviews

There are no reviews yet.

Be the first to review “Bitrek BI 810 TREK”

2018, TelematicsTalks powered by Navixy | About