Bitrek BI 820 TREK (OBD)

Bitrek BI820 OBD

Manufacturer:

Bitrek BI 820 TREK OBDII is a universal vehicle location device that work with GPS, GLONASS, Galileo and Beidou networks.

It can be used for a fleet management or personal purpose.

SKU: be1a352ccdcb.

Bitrek BI 820 TREK (OBD) description

Bitrek BI 820 TREK OBDII is a universal vehicle location device that work with GPS, GLONASS, Galileo and Beidou networks.

It can be used for a fleet management or personal purpose.

Package content

The package contents:

  • GPS Tracker
  • Documentation

Features

This tracker has a solid waterproof housing and it has internal GNSS antenna and internal GSM antenna.

Location and tracking

Bitrek BI 820 is a universal vehicle location device that work with GPS, GLONASS, Galileo and Beidou networks.

Mobile networks

With Quad-band GSM 2G module Bitrek BI 820 can be operated all over the world.

Local and remote management

Bitrek BI 820 tracker can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

Also it is fully configurable via serial cable using proprietary software (Bitrek Configurator)

Power supply

Bitrek BI 820 takes power supply from OBD-port, so you can install it on any car, that has an OBD-port.

It has a built-in battery that can support the 8 hours of autonomous work.

LED indication

Bitrek BI 820 has 3 LEDs

  • Red for Power 
  • Green for GNSS 
  • Yellow for GSM

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47776
Integrated on25/06/2015
Revised on25/06/2015
General information
PurposeVehicle
InstallationDIY
Housing
Weight208 g (7.34 oz.)
Size95x95x29 mm (3.74x3.74x1.14 in)
Waterproof classIP6X
GNSS Location
Internal antenna (GNSS)
External antenna (GNSS)
GPS
GLONASS
Galileo
Beidou
Connectivity
Cellular network typeGSM 900/1800
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Discrete inputs
Hardware features
Battery capacity1000 mAh
Built-in battery
Tracking features
Tracking modesContinuous
Location by Cell IDFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
GNSS satellites fixedFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over SMS)
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47776
Integrated on25/06/2015
Revised on25/06/2015

Bitrek BI 820 is tightly integrated with this software platform.

Activation process

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

When you activate a device, the following SMS command is sent from server to device:

SMS command from

Server to Device

SMS reply from

Device to Server

Command

explanation

setparam 0245 tracker.navixy.com;

setparam 0246 47776;

setparam 0242 <APN>;

setparam 0243 <user>;

setparam 0244 <passwd>;

setparam 0903 300;

setparam 0011 300;

setparam 0012 100;

setparam 0013 10;

setparam 0470 1;

setparam 0474 3;

setparam 0420 1;

setparam 0410 1;

setparam 0450 1;

setparam 0440 1;

 Setup okActivating device setup

Some parameters will depend on your cellular network operator:

  • APN: The Access Point Name for the GSM SIM card.
  • User: Username for the GPRS
  • Password: Password for the GPRS

As soon as this command is executed the GPS tracker will connect to the server, and the rest of configuration process will be done via GPRS channel.

Manual configuration

If you experience issues with the SMS delivery from the platform to device in your country, you can setup device manually by sending the above list of commands from your mobile phone.

Other

Bitrek hardware is also supported in other platforms, in particular, in Wialon and Fort Telecom.

Reviews

There are no reviews yet.

Be the first to review “Bitrek BI 820 TREK (OBD)”

2018, TelematicsTalks powered by Navixy | About