Bitrek BI 910 TREK

Manufacturer:

Bitrek BI 910 TREK OBDII is a universal vehicle location device that work with GPS, GLONASS, Galileo and Beidou networks.

It can be used for a fleet management or personal purpose.

SKU: 1b822962fdbc.

Bitrek BI 910 TREK description

Bitrek BI 910 TREK OBDII is a universal vehicle location device that work with GPS, GLONASS, Galileo and Beidou networks.

It can be used for a fleet management or personal purpose.

Package content

The package contents:

  • GPS Tracker
  • GSM antenna (2m)
  • GPS antenna (2m)
  • Power (and additional sensors) cable
  • Documentation

Features

This tracker has a solid waterproof housing. It has internal GNSS antenna and external GSM antenna. This tracker can be easily connected with OBDII port (via FMS protocol) for reading data from on-board PC. It supports driver ID reading and voice communication options.

Location and tracking

Bitrek BI 910 is a universal vehicle location device that work with GPS, GLONASS, Galileo and Beidou networks.

The device supports only continuous tracking mode.

Mobile networks

With Quad-band GSM 2G module Bitrek BI 910 can be operated all over the world.

Local and remote management

Bitrek BI 910 tracker can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

Also it is fully configurable via serial cable using proprietary software (Bitrek Configurator)

Power supply

Bitrek BI 910 takes power supply from OBD-port, so you can install it on any car, that has an OBD-port.

It has a built-in battery that can support the 8 hours of autonomous work.

LED indication

Bitrek BI 910 has 3 LEDs

  • Red for Power 
  • Green for GNSS
  • Yellow for GSM

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47776
Integrated on25/06/2015
Revised on25/06/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight200 g (7.05 oz.)
Size125x95x29 mm (4.92x3.74x1.14 in)
Waterproof classIP6X
GNSS Location
Internal antenna (GNSS)No, Yes
External antenna (GNSS)No, Yes
GPS
GLONASS
Galileo
Beidou
Connectivity
Cellular network typeGSM 900/1800
Internal antenna (Connection)
External antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
RS485 interface
Number of outputs2
Number of inputs (all types)8
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Outputs
Feature already supported in
Hardware features
Battery capacity1000 mAh
Feature already supported in
Built-in battery
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Driver ID readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Input changeFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
GNSS satellites fixedFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeInternal, YesFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over SMS)
Feature already supported in
Remote outputs controlYes (over SMS)
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47776
Integrated on25/06/2015
Revised on25/06/2015

Bitrek 910 is tightly integrated with this software platform.

Activation process

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

When you activate a device, the following SMS command is sent from server to device:

SMS command from

Server to Device

SMS reply from

Device to Server

Command

explanation

setparam 0245 tracker.navixy.com;

setparam 0246 47776;

setparam 0242 <APN>;

setparam 0243 <user>;

setparam 0244 <passwd>;

setparam 0903 300;

setparam 0011 300;

setparam 0012 100;

setparam 0013 10;

setparam 0470 1;

setparam 0474 3;

setparam 0420 1;

setparam 0410 1;

setparam 0450 1;

setparam 0440 1;

 Setup ok Activating device setup

Some parameters will depend on your cellular network operator:

  • APN: The Access Point Name for the GSM SIM card.
  • User: Username for the GPRS
  • Password: Password for the GPRS

As soon as this command is executed the GPS tracker will connect to the server, and the rest of configuration process will be done via GPRS channel.

Manual configuration

If you experience issues with the SMS delivery from the platform to device in your country, you can setup device manually by sending the above list of commands from your mobile phone.

Other

Bitrek hardware is also supported in other platforms, in particular, in Wialon and Fort Telecom.

Reviews

There are no reviews yet.

Be the first to review “Bitrek BI 910 TREK”

2018, TelematicsTalks powered by Navixy | About