Blip Vehicle

concox gt02

Manufacturer:

Blip Vehicle is a very simple vehicle GPS tracker. It is suitable for fleet management when knowing the location of the vehicle is most important.

Blip Vehicle description

Blip Vehicle is a very simple vehicle GPS tracker. It is suitable for fleet management when knowing the location of the vehicle is most important.

Package contents

Blip Vehicle is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation.

The standard package contains:

  • Device
  • Power cord
  • User Manual

Location and tracking

Blip Vehicle is embedded with GPS, it doesn’t support GLONASS or alternative systems.

Mobile networks

Blip Vehicle has a Quad-band GSM 2G that allows to operate it all over the world.

Power supply

External power supply range might be 9V – 36V, which makes possible to install device both on cars and vans.

Local and remote management

Blip Vehicle can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED Indication

Blip Vehicle has three LED indicating:

  • Backup battery charge
  • GSM/GPRS mode
  • GPS signal reception

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47735
Integrated on05/02/2015
Revised on05/02/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight53 g (1.87 oz.)
Size86.7x44x13.7 mm (3.41x1.73x0.54 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Fall/ShakeFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over SMS)Feature already supported
Feature already supported in
Remote outputs controlYes (over SMS)Feature already supported
Feature already supported in
Certification
CE
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47735
Integrated on05/02/2015
Revised on05/02/2015

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • APN123456 <apn> <apnUser> <apnPass>
  • adminip123456 <server_ip> 47735
  • timezone123456 0
  • ITV123456 30

<APN_Name> – your local GSM-provider APN

<login>,<Password> – your local GSM-provider user and password for APN

Reviews

There are no reviews yet.

Be the first to review “Blip Vehicle”

2018, TelematicsTalks powered by Navixy | About