C2STEK FL10

Manufacturer:

C2STEK FL10 is a simple GPS tracker suitable for use on remote objects. Inputs and controllable outputs will provide you with more information and control over the object.

C2STEK FL10 description

C2STEK FL10 is a simple GPS tracker suitable for use on remote objects. Inputs and controllable outputs will provide you with more information and control over the object.

Location and tracking

  • GPS
  • Interval and continuous tracking modes

Mobile networks

  • Quad Band GSM module

Power supply

  • Build-in 800 mAh battery
  • Power supply: 9-36V DC

Inputs and outputs

  • 3 digital inputs
  • 1 digital output

Other features

  • Emergency button
  • Remote output control
  • LED indication
  • 4MB internal Flash memory

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47674
General information
PurposeVehicle
InstallationProfessional
Housing
Size81x57x21 mm (3.19x2.24x0.83 in)
GNSS Location
GPS
Connectivity
Cellular network typeGSM Quad Band
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)3
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity800 mAh
Feature already supported in
Built-in batteryFeature already supported
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Detach sensorFeature already supported
Feature already supported in
Hardware extras
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous, Interval
Feature can be supported upon request
Events monitoring
External power cut offFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47674

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

*1234*GPRS:1234567890,{server_ip},47674,01,{apn},{apn_user},{apn_pass}#
*1234*SL*C#
*1234*ITV60#
*1234*FD:100#
*1234*CR:30#

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “C2STEK FL10”

2018, TelematicsTalks powered by Navixy | About