CalAmp LMU-2030

Manufacturer:

The LMU-2030 series provides a range of easy-to-install cost optimized vehicle tracking devices designed to meet the needs of the growing connected car market. The LMU-2030 series is optimized for a diverse range of automotive applications in passenger or light-duty vehicles.

The LMU-2030 from CalAmp features devices with a compact form factor, high-sensitivity GPS for reliable location and tracking and patented triple-axis accelerometer motion sensing technology for detecting aggressive driving maneuvers such as harsh acceleration, braking and cornering, and high-impact events.

CalAmp LMU-2030 description

The LMU-2030 series provides a range of easy-to-install cost optimized vehicle tracking devices designed to meet the needs of the growing connected car market. The LMU-2030 series is optimized for a diverse range of automotive applications in passenger or light-duty vehicles.

Location and tracking

  • Continuous tracking mode
  • LBS Support

Mobile networks

  • 850/900/1800/1900 MHz
  • 2G/3G/4G Support

Power supply

  • External power supply (9-16 V)

Other features

  • Remote management
  • OBD connector
  • Sleep mode

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47710
General information
PurposeVehicle
InstallationDIY
Housing
Weight52 g (1.83 oz.)
Size43x64x25 mm (1.69x2.52x0.98 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G, 3G, 4G
Interfaces
ACC/Ignition inputFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47710

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

!RP,2306,0,<apn>
!RP,2314,0,<apnUser>
!RP,2315,0,<apnPass>
!RP,1024,35,255,1
!RP,769,0,47710
!RP,2319,0,<server_ip>
!RP,768,0,<server_ip>
!RP,1024,25,255,2
!R3,70,0
!R3,1,123

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “CalAmp LMU-2030”

2018, TelematicsTalks powered by Navixy | About