CalAmp LMU-4520

Model: CalAmp LMU-4520

Manufacturer:

CalAmp’s LMU-4520™ is a fully weatherproof dual-mode location and messaging device for mining and construction markets that features both Iridium® satellite and cellular communications as well as connection to the vehicles ECU. The LMU-4520™ offers a full set of fleet management features, comprehensive I/O system and expandable accessories, along with an IP-67 environmental rating, that makes it an industry leading value proposition. The LMU-4520 ™ expandability and flexibility lowers the cost of delivering, supporting, and growing fleet management solutions.

CalAmp LMU-4520 description

CalAmp’s LMU-4520™ is a fully weatherproof dual-mode location and messaging device for mining and construction markets that features both Iridium® satellite and cellular communications as well as connection to the vehicles ECU. The LMU-4520™ offers a full set of fleet management features, comprehensive I/O system and expandable accessories, along with an IP-67 environmental rating, that makes it an industry leading value proposition. The LMU-4520 ™ expandability and flexibility lowers the cost of delivering, supporting, and growing fleet management solutions.

Location and tracking

  • GPS Support
  • Continuous tracking mode
  • LBS Support

Mobile networks

  • 850/900/1800/1900 MHz
  • 2G / 3G Network

Power supply

  • Build-in battery (1000 mAh)
  • External power supply (9-30 V)

Inputs and outputs

  • 7 Discrete inputs
  • 4 Analog inputs
  • 4 Digital outputs

Other features

  • Internal Iridium® satellite transceiver
  • Remote management
  • IP-67
  • Accessories

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47710
General information
PurposeVehicle
InstallationProfessional
Housing
Weight340 g (11.99 oz.)
Size110.8x151.27x47.41 mm (4.36x5.96x1.87 in)
GNSS Location
GPS
Assisted GPS
Connectivity
Cellular network typeHPSA/UMTS 850/900/1900/2100
Cellular network generation2G, 3G
Interfaces
1-Wire interface
Number of outputs4
Number of inputs (all types)12
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
Network operator IDFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47710

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

!RP,2306,0,<apn>
!RP,2314,0,<apnUser>
!RP,2315,0,<apnPass>
!RP,1024,35,255,1
!RP,769,0,47710
!RP,2319,0,<server_ip>
!RP,768,0,<server_ip>
!RP,1024,25,255,2
!R3,70,0
!R3,1,123

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “CalAmp LMU-4520”

More from this manufacturer

Related Articles

Device manufacturers

2019, TelematicsTalks powered by Navixy | About

Newsletter

X

Subscribe to get the latest scoop on GPS tracking

loading...