CalAmp LMU-700

Manufacturer:

LMU-700 is an economical but full-featured tracker. This device provides a cost-effective and reliable solution for vehicle tracking.

CalAmp LMU-700 description

LMU-700 is an economical but full-featured tracker. This device provides a cost-effective and reliable solution for vehicle tracking.

Location and tracking

  • GPS
  • Continuous tracking mode
  • LBS

Mobile networks

  • GSM/GPRS 850/900/1800/1900
  • 2G

Power supply

  • Build-in 200 mAh battery

Inputs and outputs

  • 3 digital inputs
  • 1 internal VCC monitor
  • 3 digital outputs

Other features

  • GPS, Cellular LED indication
  • Operating temperature -30° to + 75° C

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47710
General information
PurposeVehicle
InstallationProfessional
Housing
Weight74 g (2.61 oz.)
Size89x54x16 mm (3.5x2.13x0.63 in)
GNSS Location
Internal antenna (GNSS)
GPS
Assisted GPS
Connectivity
Cellular network typeGSM 850/900/1800/1900
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs3
Number of inputs (all types)3
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity200 mAh
Feature already supported in
Built-in battery
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
Network operator IDFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Remote management
Server connection setup over SMS
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs control
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47710

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

!RP,2306,0,<apn>
!RP,2314,0,<apnUser>
!RP,2315,0,<apnPass>
!RP,1024,35,255,1
!RP,769,0,47710
!RP,2319,0,<server_ip>
!RP,768,0,<server_ip>
!RP,1024,25,255,2
!R3,70,0
!R3,1,123

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “CalAmp LMU-700”

2018, TelematicsTalks powered by Navixy | About