Cargo Pro 2

Manufacturer:

Cargo Pro 2 is a compact and precise GPS/GLONASS tracker perfect for tracking both personal vehicles and trucks. Built-in battery and internal memory help prevent data loss in case of poor reception.

Cargo Pro 2 description

Cargo Pro 2 is a compact and precise GPS/GLONASS tracker perfect for tracking both personal vehicles and trucks. Built-in battery and internal memory help prevent data loss in case of poor reception.

 

Location and tracking

  • GPS, GLONASS
  • Interval and continuous tracking modes

Mobile networks

  • Dual SIM
  • 850\900\1800\1900 MHz
  • 2G

Power supply

  • Build-in battery, 3.7V LiPo, starting from 300 mAh
  • External power supply

Inputs and outputs

  • 2 digital inputs
  • 1 analog input
  • 1 digital output
  • RS-485 interface
  • 1-wire interface

Other features

  • Bluetooth connection
  • Working temperature -35 .. +80 C
  • Internal memory 2MB

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47776
General information
PurposeVehicle
InstallationNot required
Housing
Weight70 g (2.47 oz.)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM 850/900/1800/1900
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)3
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Hardware features
Battery capacity450 mAh
Feature already supported in
Accelerometer
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs control
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47776

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually.

Via SMS:

pass:0000;apn1:{apn},{apn_user},{apn_pass};server:{server_hostname}:47776;setup:00100:200
pass:0000;reset:s

The <APN> parameters depend on your GSM carrier.

Via GPRS:

@timeget:60,100,10,[email protected]
@parking:80,60,0,[email protected]
@setup:00100:[email protected]
@reset:[email protected]

Reviews

There are no reviews yet.

Be the first to review “Cargo Pro 2”

2018, TelematicsTalks powered by Navixy | About