Carscop CCTR-808S

carscop-cctr-808s

Manufacturer:

Carscop CCTR-808S is a simple and cost-effective GPS tracking device. It’s main features are solar battery and huge backup battery, which is 4000 mAh. Device also has waterproof housing and magnet pins.

Carscop CCTR-808S description

Carscop CCTR-808S is a simple and cost-effective GPS tracking device. It’s main features are solar battery and huge backup battery, which is 4000 mAh. Device also has waterproof housing and magnet pins.

Package contents

The device is supplied in a cardboard box, which includes:

  • 1 main unit
  • 1 car charger
  • 1 12/24V DC adapter
  • 1 USB wire
  • and a manual.

Location and tracking

Carscop CCTR-808S is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.

As the back-up, it uses Cell-ID (LBS) location technology.

SOS-button

The device has built-in SOS button, but it only activates SMS-message/calls to the pre-defined numbers.

Mobile networks

With Quad-band GSM 2G module Carscop CCTR-808S can be operated all over the world.

Power supply

Carscop CCTR-808S has a 12/24V adapter, which makes possible to use it with all car models.

CCTR-808S also features a built-in rechargeable backup battery of 4000 mAh capacity. When fully charged it ensures about 2 days of device operation (in normal conditions).

The device also features built-in solar battery. Place the tracker in the sunlight, and the solar battery will recharge the tracker automatically, in the long distance transport or longtime tracking please install the tracker in the place with sunlight, this can extend the battery working time, but it is impossible to finished fully charging only by solar power when working.

Note: The voltage of the charger must not be higher than 5.5V. High voltage will damage the tracker. Please use the OEM adapter, it needs 5-10 hours to charge the tracker fully. Place the tracker in the sunlight as far as possible and it will extend the battery working time observably.

Local and remote management

Carscop CCTR-808S tracker can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED Indication

Carscop CCTR-808S has one LED indicator (Green)

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port6994
General information
PurposeVehicle
InstallationDIY
Housing
Weight230 g (8.11 oz.)
Size130x59x28 mm (5.12x2.32x1.1 in)
Waterproof classIP5X
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Hardware features
Battery capacity4000 mAh
Built-in battery
Hardware extras
Emergency button
Tracking features
Tracking modesContinuous, Interval
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Fall/ShakeFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Device ID typeStatic (IMEI)
Feature already supported in
Message exchange formatASCII
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port6994

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

APN*123456*<apn>
USERNAME*123456*<apnUser>,<apnPass>
IP*123456*217.23.132.215,6994
MODE*123456*1
START*123456
TIMEZONE*123456*0

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Carscop CCTR-808S”

2018, TelematicsTalks powered by Navixy | About