cGuard Litom

Manufacturer:

cGuard Litom is a vehicle GPS tracker, which is ideal for monitoring the location of remote objects. This device is easy for configuring with the help of a convenient web configurator. cGuard Litom is equipped with a SIM holder, which allows to install a SIM card. With the help of internal 4 MB memory device is able to keep tracking points.

cGuard Litom description

cGuard Litom is a vehicle GPS tracker, which is ideal for monitoring the location of remote objects. This device is easy for configuring with the help of a convenient web configurator. cGuard Litom is equipped with a SIM holder, which allows to install a SIM card. With the help of internal 4 MB memory device is able to keep tracking points.

Location and tracking

  • GPS, GLONASS Support
  • Continuous tracking mode
  • LBS Support

Mobile networks

  • Dual band 900/1800 MHz
  • 2G Network

Power supply

  • External power supply (8-40 V)

Inputs and outputs

  • 2 Discrete/Analog inputs
  • 2 Impulse/Frequency Inputs
  • 1 Output

Other features

  • Internal accelerometer
  • Local and remote management
  • Internal memory
  • RS-485 and 1-Wire

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47729
General information
PurposeVehicle
InstallationProfessional
Housing
Weight52 g (1.83 oz.)
Size70x50x20 mm (2.76x1.97x0.79 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM 900/1800
Internal antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
RS485 interface
Number of outputs1
Number of inputs (all types)4
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Impulse inputsFeature already supported
Feature already supported in
Frequency inputsFeature already supported
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor reading
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47729

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

PARAM_SET:APN_HOST:<apn_host>$
PARAM_SET:APN_USER:<apn_user>$
PARAM_SET:APN_PASSWORD:<apn_password>$
PARAM_SET:SERVER_HOST:<server_hostname>$
PARAM_SET:SERVER_POST:47729$

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “cGuard Litom”

2018, TelematicsTalks powered by Navixy | About