Concox AT3

Manufacturer:

Concox AT3 is a GPS vehicle tracker that provides fast and accurate real-time data. Strong magnet for easy installation, IPX5 waterproofing and 5400 mAh battery make it perfect for long-time use.

Concox AT3 description

Concox AT3 is a GPS vehicle tracker that provides fast and accurate real-time data. Strong magnet for easy installation, IPX5 waterproofing and 5400 mAh battery make it perfect for long-time use.

Location and tracking

  • GPS
  • LBS
  • Continuous and interval tracking modes

Mobile networks

  • Built-in quad-band GSM antenna,
  • Built-in GPS dual-mode antenna
  • Class 12 GPRS

Power supply

  • Build-in 5400 mAh lithium battery

Other features

  • IPX5 waterproof
  • 32+32Mb memory
  • LED indication
  • Equipped with a strong magnet for easy and reliable installation
  • Temperature range -20 .. 70 C

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47755
General information
PurposeAsset
InstallationNot required
Housing
Weight160 g (5.64 oz.)
Size93x58x22 mm (3.66x2.28x0.87 in)
Waterproof classIP5X
Magnet mounting
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation3G
Hardware features
Battery capacity5400 mAh
Built-in battery
Tracking features
Tracking modesContinuous, Interval
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery low
Feature already supported in
External power cut off
Feature already supported in
Antenna cut off
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47755

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending commands to the device:

Vis SMS:

APN,{apn},{apn_user},{apn_pass}#
SERVER,0,{server_ip},47755,0#
GPRSON,1#

The <APN> parameters depend on your GSM carrier.

Via GPRS:

MODE,2,11:20,24#
TIMER,60,300#
ANGLEREP,ON,10,2#
HBT,120#
BATCH,OFF,10#
SF,ON,20#
BATALM,ON,0#

Reviews

There are no reviews yet.

Be the first to review “Concox AT3”

2018, TelematicsTalks powered by Navixy | About