Concox AT4

Manufacturer:

Concox AT4 is an advanced GPS vehicle tracker. IPX5 waterproofing and 10000 mAh battery make it extremely reliable. And its strong magnet allows easy installation.

Concox AT4 description

Concox AT4 is an advanced GPS vehicle tracker. IPX5 waterproofing and 10000 mAh battery make it extremely reliable. And its strong magnet allows easy installation.

Location and tracking

  • GPS
  • LBS
  • Continuous and interval tracking modes

Mobile networks

  • Built-in quad-band GSM antenna,
  • Built-in GPS dual-mode antenna
  • Class 12 GPRS

Power supply

  • Build-in 10000 mAh LiPo battery

Other features

  • IPX5 waterproof
  • 32+32Mb memory
  • LED indication
  • Equipped with a strong magnet for easy and reliable installation
  • Temperature range -20 .. 70 C

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47755
General information
PurposeVehicle
InstallationDIY
Housing
Weight285 g (10.05 oz.)
Size108x61x30 mm (4.25x2.4x1.18 in)
Waterproof classIP5X
Magnet mounting
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Hardware features
Battery capacity10000 mAh
Built-in battery
Detach sensorFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature can be supported upon request
Feature can be supported upon request
Events monitoring
Battery lowFeature already supported
Feature already supported in
Antenna cut offFeature already supported
Feature already supported in
SIM card slot openFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47755

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually:

Via SMS:

APN,{apn},{apn_user},{apn_pass}#
SERVER,0,{server_ip},47755,0#
GPRSON,1#

The <APN> parameters depend on your GSM carrier.

Via GPRS:

MODE,2,11:20,24#
TIMER,60,300#
ANGLEREP,ON,10,2#
HBT,120#
BATCH,OFF,10#
SF,ON,20#
BATALM,ON,0#

Reviews

There are no reviews yet.

Be the first to review “Concox AT4”

2018, TelematicsTalks powered by Navixy | About