Concox GT06F

Manufacturer:

Concox GT06F is a compact vehicle GPS tracker, which has discrete and analog inputs. Also this device allows you to control engine distantly. Concox GT06F can be used for fuel monitoring, that is useful in fleet management.

Concox GT06F description

Concox GT06F is a compact vehicle GPS tracker, which has discrete and analog inputs. Also this device allows you to control engine distantly. Concox GT06F can be used for fuel monitoring, that is useful in fleet management.

Location and tracking

  • GPS Support
  • Continuous tracking mode
  • LBS Support

Mobile networks

  • 850/900/1800/1900 MHz
  • 2G Network

Power supply

  • 450mAh/3.7V Li-Po battery
  • 9-36VDC

Inputs and outputs

  • 1 Discrete and 1 Analog inputs
  • 1 Digital Output

Other features

  • Emergency button
  • Remote management
  • Door status detection

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47755
General information
PurposeVehicle
InstallationProfessional
Housing
Weight80 g (2.82 oz.)
Size98x52x15 mm (3.86x2.05x0.59 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)2
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over SMS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47755

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

APN,{apn},{apn_user},{apn_pass}#
SERVER,0,{server_ip},47755,0#
GPRSON,1#

The {APN} parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Concox GT06F”

2018, TelematicsTalks powered by Navixy | About