Concox GT06N

Manufacturer:

Concox GT06N is vehicle GPS tracker with a wide range of options to prevent the car stealing. It is suitable for personal use and fleet management when remote control of the vehicle is the most important.

It has a built-in GPS and GSM antenna and some security options like towing sensor, SOS alarm, Tele-cut off function for petrol and electricity.

SKU: 296974438bd9.

Concox GT06N description

Concox GT06N is vehicle GPS tracker with a wide range of options to prevent the car stealing. It is suitable for personal use and fleet management when remote control of the vehicle is the most important.

It has a built-in GPS and GSM antenna and some security options like towing sensor, SOS alarm, Tele-cut off function for petrol and electricity.

Package contents

Concox GT06N is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation.

The standard package contains:

  • Device
  • Power cord
  • Relay
  • Microphone
  • SOS alarm cable & button
  • User Manual

Location and tracking

Concox GT06N is embedded with GPS, it doesn’t support GLONASS or alternative systems.

The tracking mode, which is supported by device, is tracking by time interval.

As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Mobile networks

Concox GT06N has a Quad-band GSM 2G that allows to operate it all over the world.

Power supply

GT06N features a rechargeable 450 mAh battery. When fully charged it ensures about 3-5 hours of device operation (in normal conditions).

Local and remote management

GT06N can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED Indication

Concox GT06N has three LED indicating:

  • Backup battery charge

  • GSM/GPRS mode

  • GPS signal reception

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47755
Integrated on05/02/2015
Revised on05/02/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight96 g (3.39 oz.)
Size90x52x15 mm (3.54x2.05x0.59 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Discrete inputsFeature already supported
Feature already supported in
Hardware features
Battery capacity450 mAh
Feature already supported in
Built-in battery
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Engine block relayFeature already supported
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47755
Integrated on05/02/2015
Revised on05/02/2015

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • APN,<APN name>,<user>,<password>#
  • SERVER,1,217.23.132.215,47755,0#

<APN_Name> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

Reviews

There are no reviews yet.

Be the first to review “Concox GT06N”

2018, TelematicsTalks powered by Navixy | About