Concox JV200

Manufacturer:

Concox JV200 vehicle GPS tracker with real time online tracking is a practical and easy-to-use GPS tracker specially designed for vehicle tracking. It combines GSM+GPRS+GPS wireless communication technology, with AGPS function the device can easily achieve extreme fast positioning (Cold start < 10s).

Concox JV200 description

Concox JV200 vehicle GPS tracker with real time online tracking is a practical and easy-to-use GPS tracker specially designed for vehicle tracking. It combines GSM+GPRS+GPS wireless communication technology, with AGPS function the device can easily achieve extreme fast positioning (Cold start < 10s).

Package contents

Concox JV200 is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation.

The standard package contains:

  • Device
  • Power cord
  • User Manual

Location and tracking

Concox JV200 is embedded with GPS, it doesn’t support GLONASS or alternative systems.

As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Mobile networks

Concox JV200 has a Quad-band GSM 2G that allows to operate it all over the world.

Power supply

JV200 features a rechargeable 400 mAh battery. When fully charged it ensures about 3-5 hours of device operation (in normal conditions).

Local and remote management

JV200 can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED Indication

Concox JV200 has three LED indicating:

  • Backup battery charge

  • GSM/GPRS mode

  • GPS signal reception

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47755
General information
PurposeVehicle
InstallationProfessional
Housing
Weight51 g (1.8 oz.)
Size86.6x44x13.6 mm (3.41x1.73x0.54 in)
GNSS Location
Internal antenna (GNSS)
GPS
Assisted GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity400 mAh
Feature already supported in
Built-in battery
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47755

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • APN,<APN name>,<user>,<password>#
  • SERVER,1,217.23.132.215,47755,0#

<APN_Name> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

Reviews

There are no reviews yet.

Be the first to review “Concox JV200”

2018, TelematicsTalks powered by Navixy | About