Concox Qbit

Manufacturer:

Concox Qbit will give you a completely new level of awareness and convenience. It stands out by compact, lightweight design for both excellent mobility and reliability. Loaded with GPS, Qbit enables you to view real-time location from the computer, tablet or smartphone.

Concox Qbit description

Qbit Personal GPS Tracker will give you a completely new level of awareness and convenience. It stands out by compact, lightweight design for both excellent mobility and reliability. Loaded with GPS, Qbit enables you to view real-time location from the computer, tablet or smartphone. It is capable of withstanding the extreme environment. Being stylish, tough and accurate, Qbit is an idea for kids, the elderly, and people with special needs.

Package contents

Concox Qbit is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation.

The standard package contains:

  • Device
  • Charger
  • User Manual

Location and tracking

Concox Qbit is embedded with GPS, it doesn’t support GLONASS or alternative systems. It supports Location-Based Service (LBS/Cell-ID) when GPS is not available.

Mobile networks

Concox Qbit has an 800/1900 GSM 2G.

 

Local and remote management

Concox Qbit can be controlled over GPRS. There is also a list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

Features

Concox Qbit supports such features, as:

  • GPS+LBS positioning – Allow the location to be pinpointed in real time or periodically
  • IPX5 waterproof – Water-resistant case to ensure stable operation in a tough environment
  • Geo-fence alarm – Create geofences in circle or rectangle for key locations
  • Voice monitoring – Listen to the surroundings by sending the text message
  • SOS call & Speed-dial – Thumb sized button allowing urgent call during an emergency case
  • Low battery alarm – A warning will be sent by Email or SMS when low battery occurs
  • Two-way audio – With MIC and speaker, it realizes two-way communication

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47755
General information
PurposePersonal
InstallationNot required
Housing
Weight33 g (1.16 oz.)
Size45x45x16 mm (1.77x1.77x0.63 in)
Waterproof classIP5X
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM 900/1800
Internal antenna (Connection)
Cellular network generation2G
Hardware features
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47755

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode through the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending commands to the device:

Vis SMS:

APN,{apn},{apn_user},{apn_pass}#
SERVER,0,217.23.132.215,47755,0#
GPRSON,1#

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Concox Qbit”

2018, TelematicsTalks powered by Navixy | About