Eelink TK116

Manufacturer:

TK116 GPS is a low cost tracker, which allows you to monitor and control the vehicle via GPRS. It can help customers to manage their fleets. TK116 also has discrete input which it is very useful in ignition status monitoring. With the help of digital output you can switch off vehicle’s engine distantly

Eelink TK116 description

TK116 GPS is a low cost tracker, which allows you to monitor and control the vehicle via GPRS. It can help customers to manage their fleets. TK116 also has discrete input which it is very useful in ignition status monitoring. With the help of digital output you can switch off vehicle’s engine distantly

Location and tracking

  • GPS Support
  • Continuous tracking mode
  • LBS Support
  • A-GPS

Mobile networks

  • 850/900/1800/1900MHz
  • 2G Network

Power supply

  • Build-in battery (200 mAh)
  • External power supply (6-36)

Inputs and outputs

  • 1 Discrete input
  • 1 Output

Other features

  • Emergency button
  • Remote management
  • Accessories

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47734
General information
PurposeVehicle
InstallationProfessional
Housing
Weight45 g (1.59 oz.)
Size79.5x38.5x10.5 mm (3.13x1.52x0.41 in)
GNSS Location
Internal antenna (GNSS)
GPS
Assisted GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Hardware features
Emergency buttonFeature can be supported upon request
Feature can be supported upon request
Internal temperature sensorFeature can be supported upon request
Feature can be supported upon request
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Fall/ShakeFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47734

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

APN,0000,{apn},{apn_user},{apn_pass}
IP,0000,{server_ip},47734
TZ,0000,0.0

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Eelink TK116”

Related Articles

2018, TelematicsTalks powered by Navixy | About