Manufacturer:

The TK319 vehicle tracker is a self-contained, integrated commercial grade vehicle tracking device that uses GPS (uBlox IC) satellite location in combination with UMTS/HSPA module of uBlox’s UMTS/HSPA to report that location. The UMTS/HSPA module is used to provide efficient and cost-effective high-speed mobile connectivity than any other modules.

 

Eelink TK319 description

The TK319 vehicle tracker is a self-contained, integrated commercial grade vehicle tracking device that uses GPS (uBlox IC) satellite location in combination with UMTS/HSPA module of uBlox’s UMTS/HSPA to report that location. The UMTS/HSPA module is used to provide efficient and cost-effective high-speed mobile connectivity than any other modules.

The TK319 vehicle tracker is optimized for reliability, cost, and size that is targeted at expandable and truck, cargo or electric motor oriented IOT applications, etc. This real-time GPS vehicle tracker is also targeted at the property tracking market.

Location and tracking

  • GPS support
  • Continuous tracking mode

Mobile networks

  • 3G Network
  • GSM Band 850/900/1800/1900
  • WCDMA Band 800/850/900/1900/2100

Power supply

  • Build-in battery 140 mAh
  • External power supply (12 – 72V)

Inputs and outputs

  • 1 ACC input
  • 1 output

Other features

  • Internal antennas
  • Waterproof level IP65
  • Built-in G-sensor

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47723
General information
PurposeVehicle
InstallationProfessional
Housing
Weight50 g (1.76 oz.)
Size89x37x12 mm (3.5x1.46x0.47 in)
Waterproof classIP65
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM/GPRS 850/900/1800/1900, WCDMA 800/850/900/1900/2100
Internal antenna (Connection)
Cellular network generation2G, 3G
Interfaces
Number of outputs1
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity140 mAh
Feature already supported in
Built-in battery
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47723

Automatic activation

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode through the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set the local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending the following command to the device:

APN,{apn},{apn_user},{apn_pass}#
SERVER,”tcp://{server_ip}:47723″#

The <APN> parameters depend on your GSM carrier and should be sent without brackets.

Reviews

There are no reviews yet.

Be the first to review “Eelink TK319”

Related Articles

2018, TelematicsTalks powered by Navixy | About