Eelink TPT02

Model: Eelink TPT02

Manufacturer:

TPT02 Temperature Tracker is an easy online solution for monitoring temperature and location during distribution, ensuring the delivery of safer, fresher food. TPT02 tracker uses the mobile phone network to upload temperature and other data at repeated intervals. This stand-alone solution needs minimal setup and requires no hardware installation.

Eelink TPT02 description

TPT02 Temperature Tracker is an easy online solution for monitoring temperature and location during distribution, ensuring the delivery of safer, fresher food. TPT02 tracker uses the mobile phone network to upload temperature and other data at repeated intervals. This stand-alone solution needs minimal setup and requires no hardware installation. Data from the device is uploaded at regular intervals. Near-real-time alerts allow you to take corrective action before significant temperature abuse occurs. Detailed shipment reports provide evidence of temperature compliance and can be shared with receivers – as the goods arrive.

Location and tracking

  • GPS
  • LBS
  • Continuous tracking mode
  • Internal antenna

Mobile networks

  • 850/900/1800/1900 MHz
  • 2G Network

Power supply

  • Build-in battery
  • External power cut alert

Other features

  • IP66 waterproof
  • Light sensor – detecting door opening
  • Shock sensor – detecting product abuse

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47723
General information
PurposeAsset, Vehicle
InstallationDIY
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM 850/900/1800/1900
Internal antenna (Connection)
Cellular network generation2G
Hardware features
Internal temperature sensorFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47723

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode through the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set the local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device via SMS:

APN,{apn},{apn_user},{apn_pass}#
SERVER,”tcp://{server_ip}:47723″#

The <APN> parameters depend on your GSM carrier and should be sent without brackets.

Reviews

There are no reviews yet.

Be the first to review “Eelink TPT02”

Related Articles

2019, TelematicsTalks powered by Navixy | About