FORT-111 GPS

Manufacturer:

FORT-111 GPS is developed based on FORT-111 platform and is one of the most reliable and sturdy GPS terminals from the FORT series.

FORT-111 GPS description

FORT-111 GPS is developed based on FORT-111 platform and is one of the most reliable and sturdy GPS terminals from the FORT series. This model features only GPS support, but doesn’t support GLONASS.

The device successively passed extensive thermal and vibration testing. It can be used in any part of the world, with temperatures ranging from -45 to +85 C. It also have reinforced power circuit able to withstand big power surges.

 

Location and tracking

  • GPS (no GLONASS support)
  • Continuous and interval tracking modes
  • LBS support

Mobile networks

  • Bands: GSM 900/1800 Mhz
  • No 3G support

Power supply

  • 1800 mAh built-in battery
  • Power supply: 8-40 V

Inputs and outputs

  • 4 general-purpose inputs with impulse counting
  • 1 ignition detection input
  • 1 analog input with voltage range 0-15V
  • 1 analog input with voltage range 0-30V
  • 2 general-purpose outputs
  • RS-485 interface
  • 1-Wire interface
  • CAN support

Other features

  • Sturdy casing and electronic circuits allow the device to withstand harsh mechanical and thermal conditions
  • Quality tracking without “corner cuts”
  • Black box with 150 000 records
  • Voice GSM connection
  • Up to 8 fuel sensors
  • RFID driver identification
  • Up to 4 digital temperature sensors

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47730
General information
PurposeVehicle
InstallationProfessional
Housing
Weight400 g (14.11 oz.)
Size104x122x33 mm (4.09x4.8x1.3 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM 900/1800
Internal antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
RS485 interface
Number of outputs2
Number of inputs (all types)7
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature can be supported upon request
Feature can be supported upon request
Events monitoring
Battery lowFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47730

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

APN={apn}:{apn_user}:{apn_pass}#1234
SERVER={server_ip}:47730#1234
RESET#1234

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “FORT-111 GPS”

2018, TelematicsTalks powered by Navixy | About