FORT-112EX

Manufacturer:

 

FORT-112EX features sturdy explosion protection casing. The device is installed on the vehicles which transport dangerous explosive materials, and corresponds with the explosion protection level 2Ex e II T4X.

FORT-112EX description

FORT-112EX features sturdy explosion protection casing. The device is installed on the vehicles which transport dangerous explosive materials, and corresponds with the explosion protection level 2Ex e II T4X.

FORT-112EX is fully compatible with the requirements of “ERA-GLONASS” system.

Location and tracking

  • GPS and GLONASS support
  • Continuous and interval tracking modes
  • LBS support

Mobile networks

  • GSM 900/1800МГц
  • UMTS 900/2100 МГц
  • 3G support

Power supply

  • 500 mAh in-build battery
  • Power voltage 8-40 V

Inputs and outputs

  • 4 general-purpose digital inputs with impulse count feature
  • 1 ignition input
  • 1 input with working voltage range 0-15V
  • 1 input with working voltage range 0-30V
  • 2 general-purpose outputs
  • 1 LED control output
  • CAN bus data
  • RS-232
  • RS-485

Other features

  • Black box for 150000 records
  • Automatic crash detection
  • Emergency call in automatic and manual modes
  • Transmit the minimum required information to the emergency center
  • Support EGTS protocol
  • Up to 8 fuel sensors

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47730
General information
PurposeVehicle
InstallationDIY
Housing
Weight300 g (10.58 oz.)
Size116x130x30 mm (4.57x5.12x1.18 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM 900/1800, GSM 900/2100
Internal antenna (Connection)
Cellular network generation2G, 3G
Interfaces
1-Wire interface
RS232 interfaceFeature already supported
Feature already supported in
Number of RS232 interfaces1
Feature already supported in
RS485 interfaceFeature already supported
Feature already supported in
Number of outputs3
Feature already supported in
Number of inputs (all types)7
Feature already supported in
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor readingFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous, Interval
Feature can be supported upon request
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Car crashFeature can be supported upon request
Feature can be supported upon request
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over SMS)Feature already supported
Feature already supported in
Remote outputs control
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47730

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

APN={apn}:{apn_user}:{apn_pass}#1234
SERVER={server_ip}:47730#1234
RESET#1234The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “FORT-112EX”

2018, TelematicsTalks powered by Navixy | About