Galileosky v7.0 Lite

Manufacturer:

Galileosky 7.0 Lite is very low weight and compact GPS/GLONASS terminal with internal antennas. It has a competitive price that is comparable to the market average. Likewise, users of Galileosky 7 Lite get a rich functionality. With the help of RS485, CAN protocols it is possible to connect a lot of external devices, which can be used to control your car fleet with the high level of usage and perfomance. Also Galileosky 7.0 Lite allows you to minimize your fuel consumption and risks of accidents. With the help of the built-in antennas, the terminal is easy to install in the car, and it is also possible to make a hidden installation.

Galileosky v7.0 Lite description

Galileosky 7.0 Lite is very low weight and compact GPS/GLONASS terminal with internal antennas. It has a competitive price that is comparable to the market average. Likewise, users of Galileosky 7 Lite get a rich functionality. With the help of RS485, CAN protocols it is possible to connect a lot of external devices, which can be used to control your car fleet with the high level of usage and perfomance. Also Galileosky 7.0 Lite allows you to minimize your fuel consumption and risks of accidents. With the help of the built-in antennas, the terminal is easy to install in the car, and it is also possible to make a hidden installation.

Location and tracking

  • GPS and GLONASS support
  • Continuous tracking mode

Mobile networks

  • GSM 850/900/1800/1900 MHz
  • 2G Network

Power supply

  • Build-in battery (Li-Ion, 600 мА)

Inputs and outputs

  • 6 Universal  Analog-discrete inputs
  • 4 Transistor outputs

Other features

  • Can, RS485 interfaces
  • Local and remote management
  • 2 SIM cards

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47773
General information
PurposeVehicle
InstallationProfessional
Housing
Weight150 g (5.29 oz.)
Size97x68x22 mm (3.82x2.68x0.87 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM 850/900/1800/1900
Internal antenna (Connection)
Cellular network generation2G
Interfaces
RS485 interface
Number of outputs4
Number of inputs (all types)6
Discrete inputs
Analog inputs
Impulse inputs
Frequency inputs
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
OdometerFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47773

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device via SMS:

AddPhone 1234
APN {apn},{apn_user},{apn_pass}
Serverip {server_hostname},47773
HeadPackBit 3,1
MainPack 10000000000000000000000000000010111111001011011111000

The {APN} parameters depend on your GSM carrier.

Via GPRS:

FLASHARCHIVE 1,1
Turning 30,30,100,60,20
WrPeriod 30,180

Reviews

There are no reviews yet.

Be the first to review “Galileosky v7.0 Lite”

2018, TelematicsTalks powered by Navixy | About