GoSafe G1C

Model: GoSafe G1C

Manufacturer:

Gosafe G1C Vehicle GPS Tracker is a practical and easy-to-use GPS tracker with small size and accurate location specially designed for vehicle tracking. It combines GPS+LBS communication technology. With EPO technology, this device can easily achieve extreme fast positioning.

GoSafe G1C description

Gosafe G1C Vehicle GPS Tracker is a practical and easy-to-use GPS tracker with small size and accurate location specially designed for vehicle tracking. It combines GPS+LBS communication technology. With EPO technology, this device can easily achieve extreme fast positioning.

Features

  • Car ACC on/off status;
  • Oil checking;
  • EPO located for assistance;

Location and tracking

G1C tracking is based on GPS signals only. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking). With EPO technology, this device can easily achieve extreme fast positioning.

Mobile networks

With Quad-band GSM module G1C can be operated all over the world.

Power supply

Device working current is 9-36V, recommended 12V and 24V. Tracker will damage if the current is
over this range. G1C also features a built-in backup battery. When fully charged it ensures about 0.5 hours of device operation (in normal conditions).

Remote management

GPS tracker GoSafe G1C can be fully controlled over GPRS, including configuration of tracking modes and outputs control. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED indication

G1C has LED indication for GPS and GSM status.

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47694
General information
PurposeVehicle
InstallationProfessional
Housing
Weight160 g (5.64 oz.)
Size96x50x31.5 mm (3.78x1.97x1.24 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in
EAC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47694

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

<SPGS*P:GSGPS*T:217.23.132.215,47694*A:{apn}N:01234567890>

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “GoSafe G1C”

2019, TelematicsTalks powered by Navixy | About