GoSafe G1S

Manufacturer:

GoSafe G1S has unique design and power standard which allows users to chose between replaceable or rechargeable batteries. Powered by CR123 replaceable batteries with total capacity of 6000mah which have enough power to send one message a day for three years. G1S is designed in such a way that it can also take the rechargeable batteries and can be charged via external power connector.

GoSafe G1S description

GoSafe G1S has unique design and power standard which allows users to chose between replaceable or rechargeable batteries. Powered by CR123 replaceable batteries with total capacity of 6000mah which have enough power to send one message a day for three years. G1S is designed in such a way that it can also take the rechargeable batteries and can be charged via external power connector.

Location and tracking

GoSafe G1S model is embedded with GPS chip. It supports Assisted GPS (A-GPS) technology as well. It uses Cell ID location (also known as LBS-tracking) as the back-up, when no satellites signals are available.

Mobile networks

With a Quad-band GSM module G1S can operate all over the world where 2G networks are supported. 3G version supports 3G networks as well.

Features

Key features of the GoSafe G1S device are:

  • 6000 mAh battery
  • Intelligent Power Management
  • IP 67 Rating

Power supply

External power supply range might be 3-5V.

GoSafe G1S also features an optional rechargeable 6000 mAh backup battery. When fully charged it ensures up to 6 months of device operation.

Local and remote management

GPS tracker GoSafe G1S can be fully controlled over GPRS, including configuration of tracking modes and outputs control. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED Indication

G1S has three LEDs

  • LED indicating GPS reception
  • LED indicating GSM/GPRS reception
  • LED indicating Power status

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47771
General information
PurposeAsset, Vehicle
InstallationProfessional
Housing
Weight160 g (5.64 oz.)
Size96x50x31.5 mm (3.78x1.97x1.24 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G, 3G
Interfaces
Number of outputs1
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity6000 mAh
Feature already supported in
Built-in batteryOptional
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Car crashFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in
EAC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47771

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

1234,UNO;+922 222 22,APN;{apn};{apn_user};{apn_pass},SVR;217.23.132.215;47771;;0;0

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “GoSafe G1S”

2018, TelematicsTalks powered by Navixy | About