GoSafe G3C

Manufacturer:

The G3C competitive tracking unit from Gosafe offers superior GPS performance, with built-in internal 750mAh back-up battery, 3-axis accelerometer for motion sense, and with one input and one output (I/O). The G3C is a complete tracking unit with two version 2G as well as 3G covering all 5 bands of 3G communication. G3C is designed for 12 or 24 volt mobile vehicles with quick and easy installation procedure.

GoSafe G3C description

The G3C competitive tracking unit from Gosafe offers superior GPS performance, with built-in internal 750mAh back-up battery, 3-axis accelerometer for motion sense, and with one input and one output (I/O). The G3C is a complete tracking unit with two version 2G as well as 3G covering all 5 bands of 3G communication. G3C is designed for 12 or 24 volt mobile vehicles with quick and easy installation procedure.

Location and tracking

GoSafe G3C model is embedded with GPS chip. It supports Assisted GPS (A-GPS) technology as well. It uses Cell ID location (also known as LBS-tracking) as the back-up, when no satellites signals are available.

Mobile networks

With a Quad-band GSM module G3C can operate all over the world where 2G networks are supported.

Features

Key features of the GoSafe G3C device are:

  • 750 mAh battery.
  • 3G support covering all 5 bands
  • 3-axis accelerometer

Power supply

External power supply range might be 12/24V, which makes possible to install device both on cars and vans.

GoSafe G3C also features an optional rechargeable 750 mAh backup battery. When fully charged it ensures about 6-9 hours of device uptime (in normal conditions).

Local and remote management

GPS tracker GoSafe G3C can be fully controlled over GPRS, including configuration of tracking modes and outputs control. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

In case ‘firmware’ of the device has an (some) error(s) or needs to be upgraded to provide the user with newly implemented services, the device can upgrade its internal ROM file over the air (Firmware OTA), using GPRS. The users do not need to visit the vehicle individually to download the new firmware on those vehicles.

LED Indication

G3C has three LEDs

  • LED indicating GPS reception
  • LED indicating GSM/GPRS reception
  • LED indicating Power status

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47771
General information
PurposeVehicle
InstallationProfessional
Housing
Weight80 g (2.82 oz.)
Size94x47x20.5 mm (3.7x1.85x0.81 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G, 3G
Interfaces
Number of outputs1
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity750 mAh
Feature already supported in
Built-in batteryOptional
Feature already supported in
Accelerometer
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Car crashFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in
EAC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47771

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

1234,UNO;+922 222 22,APN;{apn};{apn_user};{apn_pass},SVR;217.23.132.215;47771;;0;0

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “GoSafe G3C”

2018, TelematicsTalks powered by Navixy | About