IMTSA TR2si

Manufacturer:

IMTSA TR2si is a basic GPS tracker that supports OBD, RFID, iButton, fuel sensor and 2 temperature sensors.

IMTSA TR2si description

IMTSA TR2si is a basic GPS tracker featuring high-precision ublox GPS module, OBD, RFID, iButton, fuel sensor and 2 temperature sensors.

 

Location and tracking

  • u-blox GPS module with high GPS positioning accuracy
  • Continuous tracking mode (Real-time tracking by Time, Distance Interval or Intelligent Mode)
  • No LBS support

Mobile networks

  • Quad-band 850/900/1800/1900
  • No 3G support

Power supply

  • Backup battery: 300 mAh Li Polymer battery

Inputs and outputs

  • 4 digital inputs
  • 2 digital outputs
  • 1 Analog input
  • 1-wire for iButton and temperature
  • 1 RS232
  • 1 for optional panic / sos button
  • 1 micro USB

Emergency button

  • Support for the external, optional SOS button

Local and remote management

  • SMS, GPRS TCP / UDP communications

Accessories

  • GPS antenna
  • I/O cables
  • Relay (optional)
  • Door sensor (optional)
  • Microphone (optional)
  • Buzzer (optional)
  • LED lamp (optional)

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47701
Housing
Weight100 g (3.53 oz.)
Size89x55x25 mm (3.5x2.17x0.98 in)
Interfaces
1-Wire interfaceFeature can be supported upon request
Feature can be supported upon request
Number of RS232 interfaces1Feature can be supported upon request
Feature can be supported upon request
Number of outputs2
Feature can be supported upon request
Number of inputs (all types)5
Feature can be supported upon request
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
Hardware features
Emergency buttonOptional
Feature already supported in
Hardware extras
Fuel level sensor readingFeature can be supported upon request
Feature can be supported upon request
Voice listeningFeature can be supported upon request
Feature can be supported upon request
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor readingFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeFeature can be supported upon request
Feature can be supported upon request
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47701

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

*000000,002,{apn},{apn_user},{apn_pass}#
*000000,003,{server_ip},47702,0,1#

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “IMTSA TR2si”

2018, TelematicsTalks powered by Navixy | About