JamTrack JM10

Manufacturer:

JamTrack JM10 is a cost-effective vehicle tracking device.

JamTrack JM10 description

JamTrack JM10 is a cost-effective vehicle tracking device.

Package contents

Package contents include:

  • External GPS Antenna
  • External GSM Antenna
  • 10-pin harness
  • Engine block relay

Location and tracking

JamTrack JM10 model is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Mobile networks

With Quad-band GSM 2G module JM10 can be operated all over the world.

Power supply

External power supply might be 12V or 24V, which makes possible to install JM10 both on cars and vans.

JamTrack JM10 also features a built-in rechargeable backup battery. When fully charged it ensures about 3-4 hours of device operation (in normal conditions).

Local and remote management

JamTrack JM10 tracker can be fully controlled over GPRS, including configuration of tracking modes and controlling outputs. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED Indication

JamTrack JM10 has two LEDs

  • Red LED indicates GSM/GPRS mode

  • Green LED indicates GPS reception

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47735
Integrated on06/02/2015
Revised on06/02/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight120 g (4.23 oz.)
Size83x54x26 mm (3.27x2.13x1.02 in)
GNSS Location
Internal antenna (GNSS)
External antenna (GNSS)Optional
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
External antenna (Connection)Optional
Cellular network generation2G
Interfaces
Number of outputs2
Number of inputs (all types)5
ACC/Ignition inputFeature can be supported upon request
Feature can be supported upon request
Discrete inputsFeature can be supported upon request
Feature can be supported upon request
Analog inputsFeature can be supported upon request
Feature can be supported upon request
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity800 mAh
Feature already supported in
Built-in battery
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Fuel level sensor readingFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
Location by Cell IDFeature already supported
Feature already supported in
ECO drivingFeature can be supported upon request
Feature can be supported upon request
Events monitoring
Battery lowFeature can be supported upon request
Feature can be supported upon request
External power cut offFeature can be supported upon request
Feature can be supported upon request
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over SMS)Feature already supported
Feature already supported in
Remote outputs controlYes (over SMS)Feature already supported
Feature already supported in
Message exchange formatASCII
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47735
Integrated on06/02/2015
Revised on06/02/2015

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • APN123456 <apn> <apnUser> <apnPass>
  • adminip123456 217.23.132.215 47735
  • timezone123456 0
  • ITV123456 30 30

<APN_Name> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

Reviews

There are no reviews yet.

Be the first to review “JamTrack JM10”

2018, TelematicsTalks powered by Navixy | About