Kingneed T500

Manufacturer:

Kingneed T500 is a specialized cow-GPS tracker with basic functionality. The main purpose is cattle tracking.
The device features water-proof design, and large internal battery with an optional support of solar panels which prolong the battery life.
It also has special collar for the best fixation on the cow.

Kingneed T500 description

Kingneed T500 is a specialized cow-GPS tracker with basic functionality. The main purpose is cattle tracking.
The device features water-proof design, and large internal battery with an optional support of solar panels which prolong the battery life.
The device also has special collar for the best fixation on the cow.

Package content

Package contents:

  • GPS device
  • Collar
  • User manual

Location and tracking

Kingneed T500 is embedded with U-BLOX G7020-ST chip and doesn’t have support of GLONASS and alternative systems. However it supports Assisted GPS (A-GPS) technology.

There are two basic continuous tracking modes (by time interval and by distance) and interval tracking mode (see “Sleep by schedule” below).

Since T500 has no built-in memory, when user leaves GSM coverage area all tracking data will be lost.

Mobile networks

With Quad-band GSM module T500 can be operated all over the world where 2G networks exist.

Power supply

It’s claimed that fully charged battery can last from 1 to 2 days, depending on the GSM and GPS signal conditions. T500 also has several tracking mode options:

  • “routetrack” – tracker won’t sleep, GSM module is always ON, and the device sends its coordinates each N seconds while the tracker is moving. GPS module is turned off if the device is not moving.
  • “check” – tracker connects to the server each N minutes, and passes its coordinates regardless of moving state. GSM module is always ON. GPS module is turned each N minutes.
  • sleep” – deep sleep mode. The device sends its coordinates each N hours, after that it falls asleep again. GSM and GPS modules are turned on each N hours
  • “periodlocate” – this mode allows to set up to three intervals in which the device will work similar to “routetrack” mode. All other time the device will fall to a deep sleep.

Local and remote management

Kingneed T500 tracker has two general modes for GSM communication: SMS and GPRS. In GPRS mode it sends data to server and can be controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

Additional features

Kingneed T500 features optional solar panels, which may be used with the collar to prolong the tracker battery life.

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46998
General information
PurposePet
InstallationNot required
Housing
Weight50 g (1.76 oz.)
Size64x46x17 mm (2.52x1.81x0.67 in)
GNSS Location
Internal antenna (GNSS)
GPS
Assisted GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Hardware features
Battery capacity3000 mAh
Built-in batteryFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
DetachFeature already supported
Feature already supported in
Self monitoring
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46998

Kingneed T500 is tightly integrated with this software platform.

Activation process

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

Important notice:

  • Do not set any password on the device (by default: “123456”)
  • Do not set any master number prior to the device activation
  • Do not set the Time zone, it must be UTC+0h as per default
  • Do not set any pin-code to your SIM card

Manual configuration

If you experience issues with the SMS delivery from the platform to device in your country, you can setup device manually by sending these commands from your mobile phone.

*apn*apnname*apnuser*apnpassword*
*setip*217*23*132*215*46998*
*master*123456*79037976362*@GPRS*

Some parameters will depend on your cellular network operator:

  • <apn_name> – APN name
  • <apn_login> – APN login
  • <apn_pass> – APN password

 

Reviews

There are no reviews yet.

Be the first to review “Kingneed T500”

2018, TelematicsTalks powered by Navixy | About