LKGPS LK210

Manufacturer:

LKGPS LK210 is a GPS tracker with built-in GSM and GPS antennas. It is a simple, compact and cost-effective device for vehicle tracking.

LKGPS LK210 description

LKGPS LK210 is a GPS tracker with built-in GSM and GPS antennas. It is a simple, compact and cost-effective device for vehicle tracking.

Location and tracking

  • GPS support
  • LBS support

Mobile networks

  • 850/900/1800/1900 MHz
  • 2G Network

Other features

  • Remote management

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47735
General information
PurposeVehicle
InstallationNot required
Housing
Weight120 g (4.23 oz.)
Size40x23x17 mm (1.57x0.91x0.67 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47735

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

begin123456
apn123456 {apn}
apnuser123456 {apn_user}
apnpasswd123456 {apn_pass}
adminip123456 {server_ip} 47735

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “LKGPS LK210”

2018, TelematicsTalks powered by Navixy | About