Manufacturer:

Megastek MT100 is a small handheld GPS device – half the size of a palm. Controls and shows location of the field staff, elderly people or pets. An interesting feature of the device is a belt that you can optionally purchase. With the belt Megastek MT100 can be strapped to one’s wrist or ankle. The GPS device has belt-off alarm, so you can be aware every time a person take the gadget off.

Megastek MT100 description

Megastek MT100 is a small handheld GPS device – half the size of a palm. Controls and shows location of the field staff, elderly people or pets. An interesting feature of the device is a belt that you can optionally purchase. With the belt Megastek MT100 can be strapped to one’s wrist or ankle. The GPS device has belt-off alarm, so you can be aware every time a person take the gadget off.

Package contents

Megastek MT100 package contains the following device/accessories:

  • USB cable
  • AC adapter
  • USB charging cable
  • Screw driver
  • Stick for SIM card

Product features:

  • Waterproof (waterproofing grade: IP66)
  • AGPS position assisted
  • SOS alarm (LBS position assisted)
  • SOS emergency calling
  • Two-way communication
  • Monitoring mode
  • Pet mode
  • Long standby time mode
  • SMS and GPRS (TCP/UDP) communication
  • Support up to 5 authorized cell phone numbers
  • Real time tracking
  • Over speed alarm
  • Geo-fence alarm
  • Vibration alarm
  • Low battery alarm
  • Data Logger in no GSM signal area using Micro SD card (Max: 2GB)
  • Belt-off alarm

Location and tracking

Megastek MT100 is embedded with GPS. It also supports A-GPS technology.

As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Mobile networks

Megastek MT100 has a Quad-band GSM 2G module that allows to operate it all over the world.

Local and remote management

Megastek MT100 can be fully controlled over SMS. There is a list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS. 

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47706
General information
PurposePersonal, Pet
InstallationNot required
Housing
Weight75 g (2.65 oz.)
Size64.2x55.6x15 mm (2.53x2.19x0.59 in)
Waterproof classIP6X
GNSS Location
Internal antenna (GNSS)
GPS
Assisted GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Hardware features
Battery capacity750 mAh
Built-in batteryFeature already supported
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over SMS)Feature already supported
Feature already supported in
Certification
EAC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47706

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

FACID,123456,GPRS,ADDR=<server_hostname>,PORT=47706,NAME=<apnUser>,PASS=<apnPass>,APN=<apn>,ID=1234567890,MODE=0,HBE=0,HBN=HI,HBI=120,HBT=999,HBR=1,SaveAll=1
FACID,123456,LOC,I=60,T=999,L=0

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Megastek MT100”

2018, TelematicsTalks powered by Navixy | About