Meitrack MVT380

Manufacturer:

Meitrack MVT380 is a vehicle GPS tracker for using in personal cars to control the safety and status of the vehicles. It is positioned by the manufacturer as an anti-thief terminal.

It has the external GPS and GSM antennas and a full set of the popular tracking features.

The device has a microphone and a speaker for the voice communication.

SKU: 1579bb312d1d.

Meitrack MVT380 description

Meitrack MVT380 is a vehicle GPS tracker for using in personal cars to control the safety and status of the vehicles. It is positioned by the manufacturer as an anti-thief terminal.

It has the external GPS and GSM antennas and a full set of the popular tracking features.

The device has a microphone and a speaker for the voice communication.

Location and tracking

MVT380 model is embedded with GPS chip. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

The tracking mode is flexible and can be configured depending on distance, time and angle. The default parameters set by the system are 100m,  60 sec,  30 degrees. When there is no movement, tracker sends data every 180 seconds.

Interfaces

  • 5 digital inputs (3 negative inputs and 2 positive inputs)
  • 2 analog detection inputs
  • 5 outputs
  • 1 loudspeaker or microphone port
  • 1 USB port

Mobile networks

With Quad-band GSM 2G module Meitrack MVT380 can be operated all over the world.

Power supply

Meitrack MVT380 uses voltage range 11-36V, which makes possible to install it both on cars and trucks. Device also features a built-in rechargeable backup battery. When fully charged it ensures about 3 hours of device operation (in normal conditions).

Local and remote management

Meitrack devices support management via GPRS. Also, there is a wide list of SMS commands, on which device always replies back. In particular, Server address and port, APN settings can be applied remotely with SMS.

LED Indication

MVT380 has two status LEDs:

  • Status LED: indicates GSM/GPRS mode
  • Navigate LED: indicates GPS reception

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47752
Integrated on19/03/2015
Revised on19/03/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight190 g (6.7 oz.)
Size105x65x26 mm (4.13x2.56x1.02 in)
GNSS Location
External antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
External antenna (Connection)
Interfaces
1-Wire interface
Number of outputs5
Number of inputs (all types)7
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity850 mAh
Feature already supported in
Built-in battery
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
Input changeFeature already supported
Feature already supported in
Antenna cut offFeature already supported
Feature already supported in
Device switched on/offFeature already supported
Feature already supported in
Self monitoring
GNSS signal levelFeature already supported
Feature already supported in
GNSS satellites fixedFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)
Feature already supported in
Remote outputs controlYes (over GPRS)
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47752
Integrated on19/03/2015
Revised on19/03/2015

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • <tracker password>,A21,1,217.23.132.215,47752,<APN>,<APN username>,<APN password>
    • <tracker password> – the default password for tracker settings, usually it is 0000
    • <APN> – APN of your GSM provider
    • <APN username> – username of APN, if any
    • <APN password> – password of APN, if any

Reviews

There are no reviews yet.

Be the first to review “Meitrack MVT380”

2018, TelematicsTalks powered by Navixy | About