Meitrack P99G

Manufacturer:

The P99G is the newest personal GPS tracker from Meitrack. This new model is designed for the outdoor enthusiast in mind. This GPS tracker has a rouged outdoor shell that can withstand normal impacts, it has a closed loop which can be used on D clamps or threaded on or holstered to gear.

The P99G tracker has an IP67 rating, which means it is dust, water and shock proof. The tracker can be submerged in water for up to 30 minutes in a 1 meter depth. One of the best functions about the P99G is that it can find its location using Wifi, meaning that if the user is inside a building that blocks the GPS signal, the tracker will use nearby Wifi to capture and triangulate location.

Meitrack P99G description

The P99G is the newest personal GPS tracker from Meitrack. This new model is designed for the outdoor enthusiast in mind. This GPS tracker has a rouged outdoor shell that can withstand normal impacts, it has a closed loop which can be used on D clamps or threaded on or holstered to gear.

The P99G tracker has an IP67 rating, which means it is dust, water and shock proof. The tracker can be submerged in water for up to 30 minutes in a 1 meter depth. One of the best functions about the P99G is that it can find its location using Wifi, meaning that if the user is inside a building that blocks the GPS signal, the tracker will use nearby Wifi to capture and triangulate location.

Location and tracking

  • GPS Support
  • Continuous tracking mode
  • LBS Support

Mobile networks

  • 800/850/900/1900/2100 MHz
  • 2G and 3G Network

Power supply

  • Build-in battery (2000mAh/3.7V)

Other features

  • Emergency button
  • Remote management
  • LED indication
  • Accessories
  • Wi-Fi

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47752
General information
PurposePersonal
InstallationNot required
Housing
Weight106 g (3.74 oz.)
Size108x52x18 mm (4.25x2.05x0.71 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G, 3G
Tracking features
Tracking modesContinuous
Location by Cell IDFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47752

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

0000,A21,1,{server_ip},47752,{apn},{apn_user},{apn_pass}

The {APN} parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Meitrack P99G”

2018, TelematicsTalks powered by Navixy | About