Meitrack T1 description
Meitrack T1 is a solid GPS tracker for vehicles with the digital interfaces that can be used for installation of a camera, LED/LCD displays or for the other advanced features.
The device has a microphone and a speaker for the voice communication.
It has the GPS and GSM antennas that can provide the tracking accuracy about 10 meters.
Location and tracking
Meitrack T1 model is embedded with GPS chip. It supports Assisted GPS (A-GPS) technology. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).
The tracking mode is flexible and can be configured depending on distance, time and angle. The default parameters set by the system are 100m, 60 sec, 30 degrees. When there is no movement, tracker sends data every 180 seconds.
- 3 digital inputs (2 negative inputs and 1 positive input)
- 2 analog detection inputs
- 2 outputs
- 1 RS232 port
- 1 USB port
- 1-wire temperature sensor and 1 iButton Driver ID
The manufacturer offers different accesories, such as:
- Camera Handset
- RFID reader
- A21 LCD display (dialing and SMS display)
- A53 fuel sensor
- A52 digital temperature sensor + A61 sensor box
- LED display
With Quad-band GSM 2G module Meitrack T1 can be operated all over the world.
T1 uses voltage range 11-36V, which makes possible to install it both on cars and trucks. Device also features a built-in rechargeable backup battery. When fully charged it ensures about 3 hours of device operation (in normal conditions).
Local and remote management
Meitrack devices support management via GPRS. Also, there is a wide list of SMS commands, on which device always replies back. In particular, Server address and port, APN settings can be applied remotely with SMS.
Meitrack T1 has two status LEDs:
- Status LED: indicates GSM/GPRS mode
- Navigate LED: indicates GPS reception