Meitrack T622G

Manufacturer:

Meitrack T622G is a specially designed GPS tracker with the fleet management industry in mind. This unique tracker has the reliable specifications that all of Meitrack brand products hold plus more.

Having an integrated battery, the T622G can bring up to 80 hours in power saving mode, and 9 hours in normal mode. It also comes equipped with a 3D acceleration sensor for use as a towing alarm or a vibration detection power switch.

Meitrack T622G description

The T622G is a specially designed GPS tracker with the fleet management industry in mind. This unique tracker has the reliable specifications that all of Meitrack brand products hold plus more. Having an integrated battery, the T622G can bring up to 80 hours in power saving mode, and 9 hours in normal mode. It also comes equipped with a 3D acceleration sensor for use as a towing alarm or a vibration detection power switch.

Location and tracking

T622G model is embedded with GPS chip. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

The tracking mode is flexible and can be configured depending on distance, time and angle. The default parameters set by the system are 100m,  60 sec,  30 degrees. When there is no movement, tracker sends data every 180 seconds.

Interfaces

  • 3 digital inputs (1 negative trigger, 1 positive trigger, and 1 positive/negative selectable trigger)
  • 2 analog detection inputs
  • 2 outputs
  • 1 RS232 EXT port
  • 1 RS232/485 port
  • 1 USB port
  • 1 CAN bus interface
  • 1-Wire interface

Mobile networks

With Quad-band GSM 3G module Meitrack T622G can be operated all over the world.

Power supply

Meitrack T622G uses voltage range 11-36V, which makes possible to install it both on cars and trucks. Device also features a built-in rechargeable backup battery. When fully charged it ensures about 9 hours of device operation (in normal conditions).

Local and remote management

Meitrack devices support management via GPRS. Also, there is a wide list of SMS commands, on which device always replies back. In particular, Server address and port, APN settings can be applied remotely with SMS.

LED Indication

T622G has two status LEDs:

  • Status LED: indicates GSM/GPRS mode
  • Navigate LED: indicates GPS reception

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47752
General information
PurposeVehicle
InstallationProfessional
Housing
Weight190 g (6.7 oz.)
Size105x65x26 mm (4.13x2.56x1.02 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation3G
Interfaces
1-Wire interface
RS232 interfaceFeature already supported
Feature already supported in
Number of RS232 interfaces1
Feature already supported in
RS485 interface
Feature already supported in
Number of outputs2
Feature already supported in
Number of inputs (all types)5
Feature already supported in
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Analog inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Battery capacity400 mAh
Feature already supported in
Built-in batteryFeature already supported
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Fuel level sensor readingFeature already supported
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Driver ID readingFeature already supported
Feature already supported in
External temperature sensor readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
TowingFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
CAN/OBDII reading
CAN/OBDII reader typeFeature can be supported upon request
Feature can be supported upon request
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced LBS location update over GPRSFeature can be supported upon request
Feature can be supported upon request
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47752

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • <tracker password>,A21,1,217.23.132.215,47752,<APN>,<APN username>,<APN password>
    • <tracker password> – the default password for tracker settings, usually it is 0000
    • <APN> – APN of your GSM provider
    • <APN username> – username of APN, if any
    • <APN password> – password of APN, if any

Reviews

There are no reviews yet.

Be the first to review “Meitrack T622G”

2018, TelematicsTalks powered by Navixy | About