Meitrack TC68S

Manufacturer:

Meitrack TC68S is a user-friendly vehicle GPS tracker plugged into a vehicle with an OBD II connector. It can’t read telemetry data from vehicle diagnostic system, but supports vehicle positioning, tracking, and anti-theft.

Meitrack TC68S description

Meitrack TC68S is a user-friendly vehicle GPS tracker plugged into a vehicle with an OBD II connector. It can’t read telemetry data from vehicle diagnostic system, but supports vehicle positioning, tracking, and anti-theft.

With a standard OBD II plug, it can be easily installed. When the device is removed, an alert message will be sent.

Package contents

The TC68S device is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation.

The standard package contains:

  • TC68S device
  • USB cable
  • Quick start guide
  • Warranty card
  • CD

Optional accessories:

  • OBDII extension cord
  • Velcro

Location and tracking

Meitrack TC68S model is embedded with GPS chip with the support of GLONASS technology as well. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

The tracking mode is flexible configured: by moving every 100m, and every 60 sec, and on turning on 30 degrees by default. When there is no movement, tracker sends data every 180 seconds.

OBDII data reading

TC68S does not read any data from vehicle’s diagnostic system such as speed, engine RPM, coolant temperature, MIL, DTC codes, etc. It only takes power supply from OBDII port and can read board voltage.

Mobile networks

Meitrack TC68S has a Quad-band GSM 2G module so it can be operated all over the world.

Power supply

TC68S uses OBD II Connector Type A and voltage range 11-13V, which makes possible to install it on cars. Device also features built-in rechargeable backup battery. When fully charged it ensures about 1 hour of device operation (in normal conditions).

Local and remote management

Meitrack TC68S tracker can be controlled over GPRS. Also, there is a wide list of SMS commands, on which device always replies back. In particular, Server address and port, APN settings can be applied remotely with SMS.

You can also configure TC68S from a PC using proprietary software and standard USB-cable which is included into package.

LED Indication

TC68S has three LEDs:

  • GSM LED: indicates GSM/GPRS mode
  • GPS LED: indicates GPS reception

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47752
General information
PurposeVehicle
InstallationDIY
Special form factorOBDII Dongle
Housing
Weight80 g (2.82 oz.)
Size52X57X28 mm (2.05x2.24x1.1 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
ACC/Ignition inputFeature already supported
Feature already supported in
Hardware features
Battery capacity130 mAh
Feature already supported in
Built-in battery
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
DetachFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
GNSS satellites fixedFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in
EAC
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47752

Meitrack TC68S is tightly integrated with this software platform.

Automatic activation

The software platform supports automatic device activation by sending SMS commands, which includes all parameters.

Before the activation process please make sure that your device is switched ON and is located in the place with good GPS signal reception. You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep them clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If you experience issues with the SMS delivery from the platform to device in your country, you can setup device manually by sending these command to the device:

0000,A21,1,217.23.132.215,47752,<apn>,<apnUser>,<apnPass>

<APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Meitrack TC68S”

2018, TelematicsTalks powered by Navixy | About