Micron Prime Bolt Mini

Model: Micron Prime Bolt Mini

Manufacturer:

Prime Bolt Mini is a non-rechargeable asset tracker designed for reliable
multi-year deployments. Waterproofing and replaceable battery allow this device to operate from 780 to 2200 days non stop.

Micron Prime Bolt Mini description

Prime Bolt Mini is a non-rechargeable asset tracker designed for reliable
multi-year deployments. Waterproofing and replaceable battery allow this device to operate from 780 to 2200 days non stop.

Location and tracking

  • GNSS or (GPS+GLONASS)
  • Interval and continuous tracking modes
  • LBS

Mobile networks

  • GSM/GPRS: 850/900 33dBm, 1800/1900 30 dBm
  • HSPA: 850/900/1700/1800/1900/2100
  • HSPA/UMTS: All Bands, 23 dBm
  • 2G

Power supply

  •  Replaceable 5400 mAh Li-SOCI2 battery
  • External power supply 21.5 mA @ 4.2V

Other features

  • Emergency button
  • Local and remote management
  • LED indication
  • IPX6 protection
  • Magnet mounting
  • Operating temperature  -20° to 60° C; -4° to 140° F
  • RoHS Compliant
  • FCC, CE certified

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47764
General information
PurposeAsset
InstallationDIY
Housing
Weight195 g (6.88 oz.)
Size110x58x28 mm (4.33x2.28x1.1 in)
Waterproof classIPX6
Magnet mounting
GNSS Location
Internal antenna (GNSS)
GPS
GLONASSOptional
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
WiFi
Hardware features
Battery capacity5400 mAh
Built-in batteryFeature already supported
Feature already supported in
Emergency buttonFeature already supported
Feature already supported in
Internal temperature sensorFeature already supported
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Device switched on/offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced LBS location update over GPRSFeature can be supported upon request
Feature can be supported upon request
Forced GNSS location update over SMSFeature already supported
Feature already supported in
Certification
CE
Feature already supported in
FCC
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47764

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

SMS:

AT+GTQSS=AIR11,{apn},{apn_user},{apn_pass},3,,1,{server_hostname},47764,{server_ip},47764,,10,0,,,0001$

GPRS:

AT+GTCFG=AIR11,,,,,1,2,799,00,,823,,,1,600,0,3,,,3,3,,0002$
AT+GTFRI=AIR11,1,1,,254,0000,0000,600,1,600,1,,,,,,,,,,0003$
AT+GTNMD=AIR11,E,40,,3,900,1,0,120,,,,,,0004$

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Micron Prime Bolt Mini”

2019, TelematicsTalks powered by Navixy | About