MicTrack MP90 description
- 4G FDD LTE network support (also support 3G/2G network);
- OBD II connector easy to install (Plug and Play);
- Remove and disconnect alarm;
- Backup battery low power alarm.
Location and tracking
MP-90 tracking is based on GPS signals only. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).
Each model (MP90-A, MP90-E or MP90-AU) supports it’s own number of 4G frequencies, and, for example, MP90-E model cannot be operated in NA or SA.
Device working current is 12-24V. Tracker will be damaged if the current is
over this range. MP90 also features a built-in backup battery. When fully charged it ensures about 0.5 hours of device operation (in normal conditions) and about 2 hours in power saving mode.
GPS tracker MicTrack MP90 can be fully controlled over GPRS, including configuration of tracking modes. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.
MP90 has LED indication for System and GPS status.