Model: MyRope M528

Manufacturer:

MyRope M588 is a multifunctional cost-effective solution for real-time tracking & fleet management. It houses a number of advanced features such as an external antenna, voice monitoring, and SOS alarm.

MyRope M528 description

MyRope M528, with the best quality, stable performance, and versatile functions, can be applied to various kinds of fleet management like construction trucks, rental cars, logistics vehicles and public transportation, Anti-theft system, and security purpose.

Location and tracking

  • GPS support
  • Continuous tracking mode
  • LBS support

Mobile networks

  • 2G Network
  • GSM Quad Band

Power supply

  • Build-in battery
  • External power supply (9 – 34V)

Inputs and outputs

  • 3 Digital inputs
  • 2 Outputs

Other features

  • Two-way voice with speaker and mic
  • Remote engine disable
  • Remote firmware update
  • External antennas

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47666
General information
PurposeVehicle
InstallationProfessional
Housing
Size96x55x26 mm (3.78x2.17x1.02 in)
GNSS Location
External antenna (GNSS)
GPS
Chipsetu-blox
Connectivity
Cellular network typeGSM Quad Band
External antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs2
Number of inputs (all types)3
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
OutputsFeature already supported
Feature already supported in
Hardware features
Emergency buttonFeature already supported
Feature already supported in
Hardware extras
Emergency buttonFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
OdometerFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
External power source voltageFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Remote outputs controlYes (over GPRS)Feature already supported
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47666

Automatic activation

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode through the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set the local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending the following command to the device:

ss,{apn},{apn_user},{apn_pass},217.23.132.215,47666,1234567890,123456

The <APN> parameters depend on your GSM carrier and should be sent without brackets.

Reviews

There are no reviews yet.

Be the first to review “MyRope M528”

2019, TelematicsTalks powered by Navixy | About