Noran NR100

Manufacturer:

Noran NR100 is a simple OBDII GPS tracking device which can be used for monitoring vehicles. NR100 supports 2G network for data transmitting.

Noran NR100 description

Noran NR100 is a simple OBDII GPS tracking device which can be used for monitoring vehicles. NR100 supports 2G network for data transmitting.

Location and tracking

  • Continuous tracking mode

Mobile networks

  • 850/900/1800/1900 MHz
  • 2G Network

Inputs and outputs

  • 1 Ignition input

Other features

  • Good GPS Performance
  • LED indication

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47691
General information
PurposeVehicle
InstallationDIY
Housing
Weight76 g (2.68 oz.)
Size64.75x41.3x25.9 mm (2.55x1.63x1.02 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
OdometerFeature can be supported upon request
Feature can be supported upon request
Events monitoring
Battery lowFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47691

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device via SMS:

A000000,012,{apn},{apn_user},{apn_pass}
A000000,010,217.23.132.215,47691
A000000,011,1

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Noran NR100”

2018, TelematicsTalks powered by Navixy | About