Pretrace TC85

Manufacturer:

Pretrace TC85 is designed for assets tracking, especially for container tracking. Four built-in batteries with 8800Mah, with super low power consumption, allow it to operate autonomously for more than 1000 days. Water resistant and anti-dust provides an optimal solution for protecting against temperature, dust, and water spray. It is an ideal self-contained device for long term tracking deployments.

Pretrace TC85 description

Pretrace TC85 is designed for assets tracking, especially for container tracking. Four built-in batteries with 8800Mah, with super low power consumption, allow it to operate autonomously for more than 1000 days. Water resistant and anti-dust provides an optimal solution for protecting against temperature, dust, and water spray. It is an ideal self-contained device for long term tracking deployments.

Packaging content:

  • TC85 tracking device
  • User manual

Features:

  • Super Long Standby Time up to 1000 Days
  • Water Resistant, Anti-Dust, IP66
  • Easy installation
  • Internal 3-axis G-sensor for Motion Detection
  • Quad band 850/900/1800/1900 MHz
  • GPS and GSM Base Station Bi-Module Positioning
  • Low Power Consumption with Inbuilt Battery
  • Internal GSM/GPS Antennas for Easy Installation
  • Low Battery Alarm by SMS
  • OTA (Firmware Update via Wireless)
  • CE/RoHS Certified

Applications:

  • Asset tracking
  • Transportation tracking

Specifications:

  • Power Consumption: on average 15μA
  • Standby time: 10 minuted Reporting: More than 380 hrs

GSM Module:

  • Dual/Quard Band GSM 850/900/1800/1900 MHz
  • GPRS multi-slot class 10/8
  • GPRS mobile station class B
  • Class 4 (2W @ 850/900 MHz)

GPS Module:

  • Accuracy: <2.5m
  • Sensitivity: -165dBm

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46985
General information
PurposeVehicle
InstallationProfessional
Housing
Weight95 g (3.35 oz.)
Size33x59x108 mm (1.3x2.32x4.25 in)
GNSS Location
Internal antenna (GNSS)
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Hardware features
Battery capacity8800 mAh
Built-in batteryFeature already supported
Feature already supported in
Internal temperature sensorFeature can be supported upon request
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Feature can be supported upon request
Location by Cell IDFeature can be supported upon request
Feature can be supported upon request
OdometerFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature can be supported upon request
Feature can be supported upon request
Internal battery levelFeature can be supported upon request
Feature can be supported upon request
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Firmware update OTA
Feature already supported in
Forced GNSS location update over SMSFeature can be supported upon request
Feature can be supported upon request
Certification
CE
Feature can be supported upon request
FCC
Feature can be supported upon request

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46985

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

pw123456,apn={apn},{apn_user},{apn_pass}

pw123456,server=217.23.132.215,46985

The <APN> parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Pretrace TC85”

2018, TelematicsTalks powered by Navixy | About