Queclink GB100

Manufacturer:

Queclink GB100 is a device designed for self-installation by a customer. It simply mounts directly onto the vehicle’s battery with only two wires to attach. This approach allows for either a very low cost installation or for the insurance customer to self-install. Its built-in GPS receiver has very high sensitivity, a fast time to first fix and supports 1Hz (every second) location sampling during vehicle motion.

Queclink GB100 description

Queclink GB100 is a device designed for self-installation by a customer. It simply mounts directly onto the vehicle’s battery with only two wires to attach. This approach allows for either a very low cost installation or for the insurance customer to self-install. Its built-in GPS receiver has very high sensitivity, a fast time to first fix and supports 1Hz (every second) location sampling during vehicle motion.

Package contents

Package contents include:

  • Queclink GB100 device

Location and tracking

Queclink GB100 model is embedded with GPS and it also supports GLONASS technology. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Features

  • Two wire battery mounted design enabling customer self-fit or low cost installation
  • One second GPS sampling and incident notification
  • Designed for insurance and car leasing applications
  • Internal up to 1600* Hz 3-axis accelerometer supporting incident notification, driver behavior monitoring, power saving and motion detection
  • Waterproof (IP65) enclosure
  • Low power consumption, long standby time with internal battery

Mobile networks

Queclink GB100 uses a Quad-band GSM 2G module that allows to operate it all over the world.

Power supply

PWR (PIN1) / GND (PIN2) are the power input pins. The input voltage range for this device is from 8V to 32V. The device is designed to be installed in vehicles that operate on 12V/24V vehicle without the need for external transformers.

Local and remote management

Queclink GB100 tracker can be fully controlled over GPRS, including configuration of tracking modes and controlling outputs. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED Indication

Queclink GB100 has three LEDs:

  • GPS LED
  • GSM LED
  • Power LED

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47764
General information
PurposeVehicle
InstallationProfessional
Housing
Weight75 g (2.65 oz.)
Size91.5x51.5x11 mm (3.6x2.03x0.43 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Assisted GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of inputs (all types)1
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Hardware features
Battery capacity200 mAh
Feature already supported in
Built-in battery
Feature already supported in
Tracking features
Tracking modesContinuous
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
OdometerFeature already supported
Feature already supported in
ECO drivingFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Car crashFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
GNSS signal levelFeature already supported
Feature already supported in
External power source voltageFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in
Forced LBS location update over GPRSFeature already supported
Feature already supported in
Forced GNSS location update over SMSFeature already supported
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47764

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • AT+GTQSS=gb100,{apn},{apn_user},{apn_pass},3,,2,tracker.navixy.com,47764,,,,10,0,,,0001$

<APN> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

Reviews

There are no reviews yet.

Be the first to review “Queclink GB100”

2018, TelematicsTalks powered by Navixy | About