SСAT-Mayak

Manufacturer:

SCAT-Mayak is a very simple vehicle GPS tracker. It is suitable for fleet management when knowing the location of the vehicle is most important.

The main feature of the device is Driver identification via Bluetooth, so there is no need in any keys, tags, etc. The device identifies its owner by the smartphone. SKAT-Mayak has the memory for five devices, and sends SOS-message when someone tries to start the engine.

SСAT-Mayak description

SCAT-Mayak is a very simple vehicle GPS tracker. It is suitable for fleet management when knowing the location of the vehicle is most important.

The main feature of the device is Driver identification via Bluetooth, so there is no need in any keys, tags, etc. The device identifies its owner by the smartphone. SCAT-Mayak has the memory for five devices, and sends SOS-message when someone tries to start the engine.

Package contents

SCAT-Mayak is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation.

The standard package contains:

  • Device
  • Power cord
  • User Manual

Location and tracking

SCAT-Mayak has two operation modes – continuous and interval.

In interval mode it locates itself through the user-determined periods of time. In continuous mode the device is always transmitting its location, so you can track the device in real time.

SCAT-Mayak is embedded with GPS, it doesn’t support GLONASS or alternative systems.

As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Mobile networks

SCAT-Mayak has a Dual-band 900/1800 GSM 2G that allows to operate it in the supported mobile networks.

Power supply

External power supply range might be 6V – 24V, which makes possible to install device both on all car models.

The device also has a backup battery, which ensures about an hour of operation under normal conditions.

Local and remote management

SCAT-Mayak can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46995
General information
PurposeVehicle
InstallationProfessional
Housing
Weight53 g (1.87 oz.)
Size50x46x25 mm (1.97x1.81x0.98 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM 900/1800
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of inputs (all types)2
ACC/Ignition inputFeature already supported
Feature already supported in
Discrete inputsFeature already supported
Feature already supported in
Hardware features
Built-in battery
Feature already supported in
Hardware extras
Driver ID readingFeature already supported
Feature already supported in
Tracking features
Tracking modesContinuous, Interval
Feature already supported in
Location by Cell IDFeature already supported
Feature already supported in
Events monitoring
Battery lowFeature already supported
Feature already supported in
External power cut offFeature already supported
Feature already supported in
Self monitoring
Network signal levelFeature already supported
Feature already supported in
Network operator IDFeature already supported
Feature already supported in
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)
Feature already supported in
Remote outputs controlYes (over GPRS)
Feature already supported in
Certification
CE
Feature already supported in

Tracking software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port46995

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • SETAPN:<apn>,<apnUser>,<apnPass>
  • SETSERV:217.23.132.215,46995
  • SENDGPRS1

<APN_Name> – your local GSM-provider APN

<login>,<Password> – your local GSM-provider user and password for APN

Reviews

There are no reviews yet.

Be the first to review “SСAT-Mayak”

2018, TelematicsTalks powered by Navixy | About