Shenzhen HHD Technology G-400

Manufacturer:

Shenzhen HHD Technology G-400 is a GPS tracker, built as a “lock”. It combines a high security mechanical lock with GPS location system and GSM communication. It can be used for asset tracking.

Shenzhen HHD Technology G-400 description

Shenzhen HHD Technology G-400 is a GPS tracker, built as a “lock”. It combines a high security mechanical lock with GPS location system and GSM communication. It can be used for asset tracking.

Location and tracking

  • GPS
  • Continuous tracking mode

Mobile networks

  • Quad band GSM support
  • Only 2G networks

Other features

  • Locking mechanism
  • Configuration over SMS

Specifications and Features

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47694
General information
PurposeAsset
InstallationNot required
Housing
Weight200 g (7.05 oz.)
Size104x122x33 mm (4.09x4.8x1.3 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Tracking features
Tracking modesContinuous
Events monitoring
External power cut offFeature already supported
Feature already supported in
DetachFeature already supported
Feature already supported in
Self monitoring
Internal battery levelFeature already supported
Feature already supported in
Remote management
Server connection setup over SMSFeature already supported
Feature already supported in
Remote device configurationYes (over GPRS)Feature already supported
Feature already supported in

Server software

Navixy

Server Integration
Server IP Address217.23.132.215
Server port47694

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode through the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

HL66556688:APN,{apn},{apn_user},{apn_pass}
HL66556688:IP,{server_ip},47694,1234567890,0300
HL00433245:APN3,{apn},{apn_user},{apn_pass}
HL66556688:IP,{server_ip},47694,1234567890,0303

The {apn} parameters depend on your GSM carrier.

Reviews

There are no reviews yet.

Be the first to review “Shenzhen HHD Technology G-400”

2018, TelematicsTalks powered by Navixy | About