Sinowell G102 description
G102 satellite positioning system combined with anti-theft, positioning, monitor and observe, alarm for help, advertising, vehicle scheduling and tracking functions, it’s easy to use, easy to operate, the characteristics of a full-featured, the main applies to Motorcycles, vehicles and other mobile object location and tracking services. G102 fully supports the GPRS network data transmission function, GPRS platform can be combined with software to make it more widely used in large-scale cluster monitoring, emergency scheduling, location-based services, fleet management, traffic safety management and many other fields.
Location and tracking
- GPS Support
- Continuous and interval tracking modes
- LBS Support
- 850/900/1800/1900 MHz
- 2G Network
- Build-in battery
- External power supply (9-55 V)
Inputs and outputs
- 1 Discrete input
- 1 Digital output
- Emergency button
- Remote management
|Server IP Address||184.108.40.206|
Automatic activation (recommended)
The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.
You also need to keep the device with initial factory settings, in particular:
- Do not set any password, keep it clear (as by default)
- Do not set any master number prior to the device activation
- Do not set local Time zone, it must be UTC+0h (as by default)
In case automatic activation failed, you can try to register the device manually by sending following commands to the device:
The <APN> parameters depend on your GSM carrier.